FILE
imx6sx.dtsi
File preview with syntax highlighting.
linux-6.19.14/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
1// SPDX-License-Identifier: GPL-2.0 2// 3// Copyright 2014 Freescale Semiconductor, Inc. 4 5#include <dt-bindings/clock/imx6sx-clock.h> 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/input/input.h> 8#include <dt-bindings/interrupt-controller/arm-gic.h> 9#include "imx6sx-pinfunc.h" 10 11/ { 12 #address-cells = <1>; 13 #size-cells = <1>; 14 /* 15 * The decompressor and also some bootloaders rely on a 16 * pre-existing /chosen node to be available to insert the 17 * command line and merge other ATAGS info. 18 */ 19 chosen {}; 20 21 aliases { 22 can0 = &flexcan1; 23 can1 = &flexcan2; 24 ethernet0 = &fec1; 25 ethernet1 = &fec2; 26 gpio0 = &gpio1; 27 gpio1 = &gpio2; 28 gpio2 = &gpio3; 29 gpio3 = &gpio4; 30 gpio4 = &gpio5; 31 gpio5 = &gpio6; 32 gpio6 = &gpio7; 33 i2c0 = &i2c1; 34 i2c1 = &i2c2; 35 i2c2 = &i2c3; 36 i2c3 = &i2c4; 37 mmc0 = &usdhc1; 38 mmc1 = &usdhc2; 39 mmc2 = &usdhc3; 40 mmc3 = &usdhc4; 41 serial0 = &uart1; 42 serial1 = &uart2; 43 serial2 = &uart3; 44 serial3 = &uart4; 45 serial4 = &uart5; 46 serial5 = &uart6; 47 spi0 = &ecspi1; 48 spi1 = &ecspi2; 49 spi2 = &ecspi3; 50 spi3 = &ecspi4; 51 spi4 = &ecspi5; 52 usb0 = &usbotg1; 53 usb1 = &usbotg2; 54 usb2 = &usbh; 55 usbphy0 = &usbphy1; 56 usbphy1 = &usbphy2; 57 }; 58 59 cpus { 60 #address-cells = <1>; 61 #size-cells = <0>; 62 63 cpu0: cpu@0 { 64 compatible = "arm,cortex-a9"; 65 device_type = "cpu"; 66 reg = <0>; 67 next-level-cache = <&L2>; 68 operating-points = < 69 /* kHz uV */ 70 996000 1250000 71 792000 1175000 72 396000 1075000 73 198000 975000 74 >; 75 fsl,soc-operating-points = < 76 /* ARM kHz SOC uV */ 77 996000 1175000 78 792000 1175000 79 396000 1175000 80 198000 1175000 81 >; 82 clock-latency = <61036>; /* two CLK32 periods */ 83 #cooling-cells = <2>; 84 clocks = <&clks IMX6SX_CLK_ARM>, 85 <&clks IMX6SX_CLK_PLL2_PFD2>, 86 <&clks IMX6SX_CLK_STEP>, 87 <&clks IMX6SX_CLK_PLL1_SW>, 88 <&clks IMX6SX_CLK_PLL1_SYS>; 89 clock-names = "arm", "pll2_pfd2_396m", "step", 90 "pll1_sw", "pll1_sys"; 91 arm-supply = <®_arm>; 92 soc-supply = <®_soc>; 93 nvmem-cells = <&cpu_speed_grade>; 94 nvmem-cell-names = "speed_grade"; 95 }; 96 }; 97 98 ckil: clock-ckil { 99 compatible = "fixed-clock"; 100 #clock-cells = <0>; 101 clock-frequency = <32768>; 102 clock-output-names = "ckil"; 103 }; 104 105 osc: clock-osc { 106 compatible = "fixed-clock"; 107 #clock-cells = <0>; 108 clock-frequency = <24000000>; 109 clock-output-names = "osc"; 110 }; 111 112 ipp_di0: clock-ipp-di0 { 113 compatible = "fixed-clock"; 114 #clock-cells = <0>; 115 clock-frequency = <0>; 116 clock-output-names = "ipp_di0"; 117 }; 118 119 ipp_di1: clock-ipp-di1 { 120 compatible = "fixed-clock"; 121 #clock-cells = <0>; 122 clock-frequency = <0>; 123 clock-output-names = "ipp_di1"; 124 }; 125 126 anaclk1: clock-anaclk1 { 127 compatible = "fixed-clock"; 128 #clock-cells = <0>; 129 clock-frequency = <0>; 130 clock-output-names = "anaclk1"; 131 }; 132 133 anaclk2: clock-anaclk2 { 134 compatible = "fixed-clock"; 135 #clock-cells = <0>; 136 clock-frequency = <0>; 137 clock-output-names = "anaclk2"; 138 }; 139 140 mqs: mqs { 141 compatible = "fsl,imx6sx-mqs"; 142 gpr = <&gpr>; 143 status = "disabled"; 144 }; 145 146 pmu { 147 compatible = "arm,cortex-a9-pmu"; 148 interrupt-parent = <&gpc>; 149 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; 150 }; 151 152 usbphynop1: usbphynop1 { 153 compatible = "usb-nop-xceiv"; 154 #phy-cells = <0>; 155 }; 156 157 soc: soc { 158 #address-cells = <1>; 159 #size-cells = <1>; 160 compatible = "simple-bus"; 161 interrupt-parent = <&gpc>; 162 ranges; 163 164 ocram_s: sram@8f8000 { 165 compatible = "mmio-sram"; 166 reg = <0x008f8000 0x4000>; 167 ranges = <0 0x008f8000 0x4000>; 168 #address-cells = <1>; 169 #size-cells = <1>; 170 clocks = <&clks IMX6SX_CLK_OCRAM_S>; 171 }; 172 173 ocram: sram@900000 { 174 compatible = "mmio-sram"; 175 reg = <0x00900000 0x20000>; 176 ranges = <0 0x00900000 0x20000>; 177 #address-cells = <1>; 178 #size-cells = <1>; 179 clocks = <&clks IMX6SX_CLK_OCRAM>; 180 }; 181 182 intc: interrupt-controller@a01000 { 183 compatible = "arm,cortex-a9-gic"; 184 #interrupt-cells = <3>; 185 interrupt-controller; 186 reg = <0x00a01000 0x1000>, 187 <0x00a00100 0x100>; 188 interrupt-parent = <&intc>; 189 }; 190 191 L2: cache-controller@a02000 { 192 compatible = "arm,pl310-cache"; 193 reg = <0x00a02000 0x1000>; 194 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; 195 cache-unified; 196 cache-level = <2>; 197 arm,tag-latency = <4 2 3>; 198 arm,data-latency = <4 2 3>; 199 }; 200 201 gpu: gpu@1800000 { 202 compatible = "vivante,gc"; 203 reg = <0x01800000 0x4000>; 204 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 205 clocks = <&clks IMX6SX_CLK_GPU>, 206 <&clks IMX6SX_CLK_GPU>, 207 <&clks IMX6SX_CLK_GPU>; 208 clock-names = "bus", "core", "shader"; 209 power-domains = <&pd_pu>; 210 }; 211 212 dma_apbh: dma-controller@1804000 { 213 compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh"; 214 reg = <0x01804000 0x2000>; 215 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, 216 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, 217 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, 218 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 219 #dma-cells = <1>; 220 dma-channels = <4>; 221 clocks = <&clks IMX6SX_CLK_APBH_DMA>; 222 }; 223 224 gpmi: nand-controller@1806000 { 225 compatible = "fsl,imx6sx-gpmi-nand"; 226 #address-cells = <1>; 227 #size-cells = <1>; 228 reg = <0x01806000 0x2000>, <0x01808000 0x4000>; 229 reg-names = "gpmi-nand", "bch"; 230 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; 231 interrupt-names = "bch"; 232 clocks = <&clks IMX6SX_CLK_GPMI_IO>, 233 <&clks IMX6SX_CLK_GPMI_APB>, 234 <&clks IMX6SX_CLK_GPMI_BCH>, 235 <&clks IMX6SX_CLK_GPMI_BCH_APB>, 236 <&clks IMX6SX_CLK_PER1_BCH>; 237 clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", 238 "gpmi_bch_apb", "per1_bch"; 239 dmas = <&dma_apbh 0>; 240 dma-names = "rx-tx"; 241 status = "disabled"; 242 }; 243 244 aips1: bus@2000000 { 245 compatible = "fsl,aips-bus", "simple-bus"; 246 #address-cells = <1>; 247 #size-cells = <1>; 248 reg = <0x02000000 0x100000>; 249 ranges; 250 251 spba-bus@2000000 { 252 compatible = "fsl,spba-bus", "simple-bus"; 253 #address-cells = <1>; 254 #size-cells = <1>; 255 reg = <0x02000000 0x40000>; 256 ranges; 257 258 spdif: spdif@2004000 { 259 compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif"; 260 reg = <0x02004000 0x4000>; 261 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; 262 dmas = <&sdma 14 18 0>, 263 <&sdma 15 18 0>; 264 dma-names = "rx", "tx"; 265 clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>, 266 <&clks IMX6SX_CLK_OSC>, 267 <&clks IMX6SX_CLK_SPDIF>, 268 <&clks 0>, <&clks 0>, <&clks 0>, 269 <&clks IMX6SX_CLK_IPG>, 270 <&clks 0>, <&clks 0>, 271 <&clks IMX6SX_CLK_SPBA>; 272 clock-names = "core", "rxtx0", 273 "rxtx1", "rxtx2", 274 "rxtx3", "rxtx4", 275 "rxtx5", "rxtx6", 276 "rxtx7", "spba"; 277 status = "disabled"; 278 }; 279 280 ecspi1: spi@2008000 { 281 #address-cells = <1>; 282 #size-cells = <0>; 283 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; 284 reg = <0x02008000 0x4000>; 285 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; 286 clocks = <&clks IMX6SX_CLK_ECSPI1>, 287 <&clks IMX6SX_CLK_ECSPI1>; 288 clock-names = "ipg", "per"; 289 status = "disabled"; 290 }; 291 292 ecspi2: spi@200c000 { 293 #address-cells = <1>; 294 #size-cells = <0>; 295 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; 296 reg = <0x0200c000 0x4000>; 297 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 298 clocks = <&clks IMX6SX_CLK_ECSPI2>, 299 <&clks IMX6SX_CLK_ECSPI2>; 300 clock-names = "ipg", "per"; 301 status = "disabled"; 302 }; 303 304 ecspi3: spi@2010000 { 305 #address-cells = <1>; 306 #size-cells = <0>; 307 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; 308 reg = <0x02010000 0x4000>; 309 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; 310 clocks = <&clks IMX6SX_CLK_ECSPI3>, 311 <&clks IMX6SX_CLK_ECSPI3>; 312 clock-names = "ipg", "per"; 313 status = "disabled"; 314 }; 315 316 ecspi4: spi@2014000 { 317 #address-cells = <1>; 318 #size-cells = <0>; 319 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; 320 reg = <0x02014000 0x4000>; 321 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 322 clocks = <&clks IMX6SX_CLK_ECSPI4>, 323 <&clks IMX6SX_CLK_ECSPI4>; 324 clock-names = "ipg", "per"; 325 status = "disabled"; 326 }; 327 328 uart1: serial@2020000 { 329 compatible = "fsl,imx6sx-uart", 330 "fsl,imx6q-uart", "fsl,imx21-uart"; 331 reg = <0x02020000 0x4000>; 332 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 333 clocks = <&clks IMX6SX_CLK_UART_IPG>, 334 <&clks IMX6SX_CLK_UART_SERIAL>; 335 clock-names = "ipg", "per"; 336 dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; 337 dma-names = "rx", "tx"; 338 status = "disabled"; 339 }; 340 341 esai: esai@2024000 { 342 compatible = "fsl,imx35-esai"; 343 reg = <0x02024000 0x4000>; 344 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; 345 clocks = <&clks IMX6SX_CLK_ESAI_IPG>, 346 <&clks IMX6SX_CLK_ESAI_EXTAL>, 347 <&clks IMX6SX_CLK_ESAI_IPG>, 348 <&clks IMX6SX_CLK_SPBA>; 349 clock-names = "core", "extal", 350 "fsys", "spba"; 351 dmas = <&sdma 23 21 0>, 352 <&sdma 24 21 0>; 353 dma-names = "rx", "tx"; 354 status = "disabled"; 355 }; 356 357 ssi1: ssi@2028000 { 358 #sound-dai-cells = <0>; 359 compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; 360 reg = <0x02028000 0x4000>; 361 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; 362 clocks = <&clks IMX6SX_CLK_SSI1_IPG>, 363 <&clks IMX6SX_CLK_SSI1>; 364 clock-names = "ipg", "baud"; 365 dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; 366 dma-names = "rx", "tx"; 367 fsl,fifo-depth = <15>; 368 status = "disabled"; 369 }; 370 371 ssi2: ssi@202c000 { 372 #sound-dai-cells = <0>; 373 compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; 374 reg = <0x0202c000 0x4000>; 375 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; 376 clocks = <&clks IMX6SX_CLK_SSI2_IPG>, 377 <&clks IMX6SX_CLK_SSI2>; 378 clock-names = "ipg", "baud"; 379 dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; 380 dma-names = "rx", "tx"; 381 fsl,fifo-depth = <15>; 382 status = "disabled"; 383 }; 384 385 ssi3: ssi@2030000 { 386 #sound-dai-cells = <0>; 387 compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; 388 reg = <0x02030000 0x4000>; 389 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; 390 clocks = <&clks IMX6SX_CLK_SSI3_IPG>, 391 <&clks IMX6SX_CLK_SSI3>; 392 clock-names = "ipg", "baud"; 393 dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; 394 dma-names = "rx", "tx"; 395 fsl,fifo-depth = <15>; 396 status = "disabled"; 397 }; 398 399 asrc: asrc@2034000 { 400 compatible = "fsl,imx6sx-asrc", "fsl,imx53-asrc"; 401 reg = <0x02034000 0x4000>; 402 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; 403 clocks = <&clks IMX6SX_CLK_ASRC_IPG>, 404 <&clks IMX6SX_CLK_ASRC_MEM>, <&clks 0>, 405 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, 406 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, 407 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, 408 <&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>, 409 <&clks IMX6SX_CLK_SPBA>; 410 clock-names = "mem", "ipg", "asrck_0", 411 "asrck_1", "asrck_2", "asrck_3", "asrck_4", 412 "asrck_5", "asrck_6", "asrck_7", "asrck_8", 413 "asrck_9", "asrck_a", "asrck_b", "asrck_c", 414 "asrck_d", "asrck_e", "asrck_f", "spba"; 415 dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, 416 <&sdma 19 23 1>, <&sdma 20 23 1>, 417 <&sdma 21 23 1>, <&sdma 22 23 1>; 418 dma-names = "rxa", "rxb", "rxc", 419 "txa", "txb", "txc"; 420 fsl,asrc-rate = <48000>; 421 fsl,asrc-width = <16>; 422 status = "okay"; 423 }; 424 }; 425 426 pwm1: pwm@2080000 { 427 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; 428 reg = <0x02080000 0x4000>; 429 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 430 clocks = <&clks IMX6SX_CLK_PWM1>, 431 <&clks IMX6SX_CLK_PWM1>; 432 clock-names = "ipg", "per"; 433 #pwm-cells = <3>; 434 }; 435 436 pwm2: pwm@2084000 { 437 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; 438 reg = <0x02084000 0x4000>; 439 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 440 clocks = <&clks IMX6SX_CLK_PWM2>, 441 <&clks IMX6SX_CLK_PWM2>; 442 clock-names = "ipg", "per"; 443 #pwm-cells = <3>; 444 }; 445 446 pwm3: pwm@2088000 { 447 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; 448 reg = <0x02088000 0x4000>; 449 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; 450 clocks = <&clks IMX6SX_CLK_PWM3>, 451 <&clks IMX6SX_CLK_PWM3>; 452 clock-names = "ipg", "per"; 453 #pwm-cells = <3>; 454 }; 455 456 pwm4: pwm@208c000 { 457 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; 458 reg = <0x0208c000 0x4000>; 459 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 460 clocks = <&clks IMX6SX_CLK_PWM4>, 461 <&clks IMX6SX_CLK_PWM4>; 462 clock-names = "ipg", "per"; 463 #pwm-cells = <3>; 464 }; 465 466 flexcan1: can@2090000 { 467 compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; 468 reg = <0x02090000 0x4000>; 469 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; 470 clocks = <&clks IMX6SX_CLK_CAN1_IPG>, 471 <&clks IMX6SX_CLK_CAN1_SERIAL>; 472 clock-names = "ipg", "per"; 473 fsl,stop-mode = <&gpr 0x10 1>; 474 status = "disabled"; 475 }; 476 477 flexcan2: can@2094000 { 478 compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; 479 reg = <0x02094000 0x4000>; 480 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; 481 clocks = <&clks IMX6SX_CLK_CAN2_IPG>, 482 <&clks IMX6SX_CLK_CAN2_SERIAL>; 483 clock-names = "ipg", "per"; 484 fsl,stop-mode = <&gpr 0x10 2>; 485 status = "disabled"; 486 }; 487 488 gpt: timer@2098000 { 489 compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt"; 490 reg = <0x02098000 0x4000>; 491 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; 492 clocks = <&clks IMX6SX_CLK_GPT_BUS>, 493 <&clks IMX6SX_CLK_GPT_3M>; 494 clock-names = "ipg", "per"; 495 }; 496 497 gpio1: gpio@209c000 { 498 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; 499 reg = <0x0209c000 0x4000>; 500 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, 501 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; 502 gpio-controller; 503 #gpio-cells = <2>; 504 interrupt-controller; 505 #interrupt-cells = <2>; 506 gpio-ranges = <&iomuxc 0 5 26>; 507 }; 508 509 gpio2: gpio@20a0000 { 510 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; 511 reg = <0x020a0000 0x4000>; 512 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, 513 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; 514 gpio-controller; 515 #gpio-cells = <2>; 516 interrupt-controller; 517 #interrupt-cells = <2>; 518 gpio-ranges = <&iomuxc 0 31 20>; 519 }; 520 521 gpio3: gpio@20a4000 { 522 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; 523 reg = <0x020a4000 0x4000>; 524 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, 525 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; 526 gpio-controller; 527 #gpio-cells = <2>; 528 interrupt-controller; 529 #interrupt-cells = <2>; 530 gpio-ranges = <&iomuxc 0 51 29>; 531 }; 532 533 gpio4: gpio@20a8000 { 534 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; 535 reg = <0x020a8000 0x4000>; 536 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, 537 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 538 gpio-controller; 539 #gpio-cells = <2>; 540 interrupt-controller; 541 #interrupt-cells = <2>; 542 gpio-ranges = <&iomuxc 0 80 32>; 543 }; 544 545 gpio5: gpio@20ac000 { 546 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; 547 reg = <0x020ac000 0x4000>; 548 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, 549 <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; 550 gpio-controller; 551 #gpio-cells = <2>; 552 interrupt-controller; 553 #interrupt-cells = <2>; 554 gpio-ranges = <&iomuxc 0 112 24>; 555 }; 556 557 gpio6: gpio@20b0000 { 558 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; 559 reg = <0x020b0000 0x4000>; 560 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, 561 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; 562 gpio-controller; 563 #gpio-cells = <2>; 564 interrupt-controller; 565 #interrupt-cells = <2>; 566 gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>; 567 }; 568 569 gpio7: gpio@20b4000 { 570 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; 571 reg = <0x020b4000 0x4000>; 572 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, 573 <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; 574 gpio-controller; 575 #gpio-cells = <2>; 576 interrupt-controller; 577 #interrupt-cells = <2>; 578 gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>; 579 }; 580 581 kpp: keypad@20b8000 { 582 compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp"; 583 reg = <0x020b8000 0x4000>; 584 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 585 clocks = <&clks IMX6SX_CLK_IPG>; 586 status = "disabled"; 587 }; 588 589 wdog1: watchdog@20bc000 { 590 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; 591 reg = <0x020bc000 0x4000>; 592 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; 593 clocks = <&clks IMX6SX_CLK_IPG>; 594 }; 595 596 wdog2: watchdog@20c0000 { 597 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; 598 reg = <0x020c0000 0x4000>; 599 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 600 clocks = <&clks IMX6SX_CLK_IPG>; 601 status = "disabled"; 602 }; 603 604 clks: clock-controller@20c4000 { 605 compatible = "fsl,imx6sx-ccm"; 606 reg = <0x020c4000 0x4000>; 607 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, 608 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; 609 #clock-cells = <1>; 610 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>; 611 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2"; 612 }; 613 614 anatop: anatop@20c8000 { 615 compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop", 616 "syscon", "simple-mfd"; 617 reg = <0x020c8000 0x1000>; 618 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, 619 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, 620 <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; 621 622 reg_vdd1p1: regulator-1p1 { 623 compatible = "fsl,anatop-regulator"; 624 regulator-name = "vdd1p1"; 625 regulator-min-microvolt = <1000000>; 626 regulator-max-microvolt = <1200000>; 627 regulator-always-on; 628 anatop-reg-offset = <0x110>; 629 anatop-vol-bit-shift = <8>; 630 anatop-vol-bit-width = <5>; 631 anatop-min-bit-val = <4>; 632 anatop-min-voltage = <800000>; 633 anatop-max-voltage = <1375000>; 634 anatop-enable-bit = <0>; 635 }; 636 637 reg_vdd3p0: regulator-3p0 { 638 compatible = "fsl,anatop-regulator"; 639 regulator-name = "vdd3p0"; 640 regulator-min-microvolt = <2625000>; 641 regulator-max-microvolt = <3400000>; 642 regulator-always-on; 643 anatop-reg-offset = <0x120>; 644 anatop-vol-bit-shift = <8>; 645 anatop-vol-bit-width = <5>; 646 anatop-min-bit-val = <0>; 647 anatop-min-voltage = <2625000>; 648 anatop-max-voltage = <3400000>; 649 anatop-enable-bit = <0>; 650 }; 651 652 reg_vdd2p5: regulator-2p5 { 653 compatible = "fsl,anatop-regulator"; 654 regulator-name = "vdd2p5"; 655 regulator-min-microvolt = <2250000>; 656 regulator-max-microvolt = <2750000>; 657 regulator-always-on; 658 anatop-reg-offset = <0x130>; 659 anatop-vol-bit-shift = <8>; 660 anatop-vol-bit-width = <5>; 661 anatop-min-bit-val = <0>; 662 anatop-min-voltage = <2100000>; 663 anatop-max-voltage = <2875000>; 664 anatop-enable-bit = <0>; 665 }; 666 667 reg_arm: regulator-vddcore { 668 compatible = "fsl,anatop-regulator"; 669 regulator-name = "vddarm"; 670 regulator-min-microvolt = <725000>; 671 regulator-max-microvolt = <1450000>; 672 regulator-always-on; 673 anatop-reg-offset = <0x140>; 674 anatop-vol-bit-shift = <0>; 675 anatop-vol-bit-width = <5>; 676 anatop-delay-reg-offset = <0x170>; 677 anatop-delay-bit-shift = <24>; 678 anatop-delay-bit-width = <2>; 679 anatop-min-bit-val = <1>; 680 anatop-min-voltage = <725000>; 681 anatop-max-voltage = <1450000>; 682 }; 683 684 reg_pcie: regulator-vddpcie { 685 compatible = "fsl,anatop-regulator"; 686 regulator-name = "vddpcie"; 687 regulator-min-microvolt = <725000>; 688 regulator-max-microvolt = <1450000>; 689 anatop-reg-offset = <0x140>; 690 anatop-vol-bit-shift = <9>; 691 anatop-vol-bit-width = <5>; 692 anatop-delay-reg-offset = <0x170>; 693 anatop-delay-bit-shift = <26>; 694 anatop-delay-bit-width = <2>; 695 anatop-min-bit-val = <1>; 696 anatop-min-voltage = <725000>; 697 anatop-max-voltage = <1450000>; 698 }; 699 700 reg_soc: regulator-vddsoc { 701 compatible = "fsl,anatop-regulator"; 702 regulator-name = "vddsoc"; 703 regulator-min-microvolt = <725000>; 704 regulator-max-microvolt = <1450000>; 705 regulator-always-on; 706 anatop-reg-offset = <0x140>; 707 anatop-vol-bit-shift = <18>; 708 anatop-vol-bit-width = <5>; 709 anatop-delay-reg-offset = <0x170>; 710 anatop-delay-bit-shift = <28>; 711 anatop-delay-bit-width = <2>; 712 anatop-min-bit-val = <1>; 713 anatop-min-voltage = <725000>; 714 anatop-max-voltage = <1450000>; 715 }; 716 717 tempmon: tempmon { 718 compatible = "fsl,imx6sx-tempmon"; 719 interrupt-parent = <&gpc>; 720 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; 721 fsl,tempmon = <&anatop>; 722 nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; 723 nvmem-cell-names = "calib", "temp_grade"; 724 clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; 725 #thermal-sensor-cells = <0>; 726 }; 727 }; 728 729 usbphy1: usbphy@20c9000 { 730 compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; 731 reg = <0x020c9000 0x1000>; 732 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; 733 clocks = <&clks IMX6SX_CLK_USBPHY1>; 734 phy-3p0-supply = <®_vdd3p0>; 735 fsl,anatop = <&anatop>; 736 }; 737 738 usbphy2: usbphy@20ca000 { 739 compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; 740 reg = <0x020ca000 0x1000>; 741 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; 742 clocks = <&clks IMX6SX_CLK_USBPHY2>; 743 phy-3p0-supply = <®_vdd3p0>; 744 fsl,anatop = <&anatop>; 745 }; 746 747 snvs: snvs@20cc000 { 748 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; 749 reg = <0x020cc000 0x4000>; 750 751 snvs_rtc: snvs-rtc-lp { 752 compatible = "fsl,sec-v4.0-mon-rtc-lp"; 753 regmap = <&snvs>; 754 offset = <0x34>; 755 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; 756 }; 757 758 snvs_poweroff: snvs-poweroff { 759 compatible = "syscon-poweroff"; 760 regmap = <&snvs>; 761 offset = <0x38>; 762 value = <0x60>; 763 mask = <0x60>; 764 status = "disabled"; 765 }; 766 767 snvs_pwrkey: snvs-powerkey { 768 compatible = "fsl,sec-v4.0-pwrkey"; 769 regmap = <&snvs>; 770 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; 771 linux,keycode = <KEY_POWER>; 772 wakeup-source; 773 status = "disabled"; 774 }; 775 }; 776 777 epit1: epit@20d0000 { 778 reg = <0x020d0000 0x4000>; 779 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; 780 }; 781 782 epit2: epit@20d4000 { 783 reg = <0x020d4000 0x4000>; 784 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; 785 }; 786 787 src: reset-controller@20d8000 { 788 compatible = "fsl,imx6sx-src", "fsl,imx51-src"; 789 reg = <0x020d8000 0x4000>; 790 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, 791 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 792 #reset-cells = <1>; 793 }; 794 795 gpc: gpc@20dc000 { 796 compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc"; 797 reg = <0x020dc000 0x4000>; 798 interrupt-controller; 799 #interrupt-cells = <3>; 800 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; 801 interrupt-parent = <&intc>; 802 clocks = <&clks IMX6SX_CLK_IPG>; 803 clock-names = "ipg"; 804 805 pgc { 806 #address-cells = <1>; 807 #size-cells = <0>; 808 809 power-domain@0 { 810 reg = <0>; 811 #power-domain-cells = <0>; 812 }; 813 814 pd_pu: power-domain@1 { 815 reg = <1>; 816 #power-domain-cells = <0>; 817 power-supply = <®_soc>; 818 clocks = <&clks IMX6SX_CLK_GPU>; 819 }; 820 821 pd_disp: power-domain@2 { 822 reg = <2>; 823 #power-domain-cells = <0>; 824 clocks = <&clks IMX6SX_CLK_PXP_AXI>, 825 <&clks IMX6SX_CLK_DISPLAY_AXI>, 826 <&clks IMX6SX_CLK_LCDIF1_PIX>, 827 <&clks IMX6SX_CLK_LCDIF_APB>, 828 <&clks IMX6SX_CLK_LCDIF2_PIX>, 829 <&clks IMX6SX_CLK_CSI>, 830 <&clks IMX6SX_CLK_VADC>; 831 }; 832 833 pd_pci: power-domain@3 { 834 reg = <3>; 835 #power-domain-cells = <0>; 836 power-supply = <®_pcie>; 837 }; 838 }; 839 }; 840 841 iomuxc: pinctrl@20e0000 { 842 compatible = "fsl,imx6sx-iomuxc"; 843 reg = <0x020e0000 0x4000>; 844 }; 845 846 gpr: syscon@20e4000 { 847 compatible = "fsl,imx6sx-iomuxc-gpr", 848 "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd"; 849 #address-cells = <1>; 850 #size-cells = <1>; 851 reg = <0x020e4000 0x4000>; 852 853 lvds_bridge: bridge@18 { 854 compatible = "fsl,imx6sx-ldb"; 855 reg = <0x18 0x4>; 856 clocks = <&clks IMX6SX_CLK_LDB_DI0>; 857 clock-names = "ldb"; 858 status = "disabled"; 859 860 ports { 861 #address-cells = <1>; 862 #size-cells = <0>; 863 864 port@0 { 865 reg = <0>; 866 867 ldb_from_lcdif1: endpoint { 868 }; 869 }; 870 871 port@1 { 872 reg = <1>; 873 874 ldb_lvds_ch0: endpoint { 875 }; 876 }; 877 }; 878 }; 879 }; 880 881 sdma: dma-controller@20ec000 { 882 compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma"; 883 reg = <0x020ec000 0x4000>; 884 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; 885 clocks = <&clks IMX6SX_CLK_IPG>, 886 <&clks IMX6SX_CLK_SDMA>; 887 clock-names = "ipg", "ahb"; 888 #dma-cells = <3>; 889 /* imx6sx reuses imx6q sdma firmware */ 890 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; 891 }; 892 }; 893 894 aips2: bus@2100000 { 895 compatible = "fsl,aips-bus", "simple-bus"; 896 #address-cells = <1>; 897 #size-cells = <1>; 898 reg = <0x02100000 0x100000>; 899 ranges; 900 901 crypto: crypto@2100000 { 902 compatible = "fsl,sec-v4.0"; 903 #address-cells = <1>; 904 #size-cells = <1>; 905 reg = <0x2100000 0x10000>; 906 ranges = <0 0x2100000 0x10000>; 907 interrupt-parent = <&intc>; 908 clocks = <&clks IMX6SX_CLK_CAAM_MEM>, 909 <&clks IMX6SX_CLK_CAAM_ACLK>, 910 <&clks IMX6SX_CLK_CAAM_IPG>, 911 <&clks IMX6SX_CLK_EIM_SLOW>; 912 clock-names = "mem", "aclk", "ipg", "emi_slow"; 913 914 sec_jr0: jr@1000 { 915 compatible = "fsl,sec-v4.0-job-ring"; 916 reg = <0x1000 0x1000>; 917 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; 918 }; 919 920 sec_jr1: jr@2000 { 921 compatible = "fsl,sec-v4.0-job-ring"; 922 reg = <0x2000 0x1000>; 923 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; 924 }; 925 }; 926 927 usbotg1: usb@2184000 { 928 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; 929 reg = <0x02184000 0x200>; 930 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; 931 clocks = <&clks IMX6SX_CLK_USBOH3>; 932 fsl,usbphy = <&usbphy1>; 933 fsl,usbmisc = <&usbmisc 0>; 934 ahb-burst-config = <0x0>; 935 tx-burst-size-dword = <0x10>; 936 rx-burst-size-dword = <0x10>; 937 status = "disabled"; 938 }; 939 940 usbotg2: usb@2184200 { 941 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; 942 reg = <0x02184200 0x200>; 943 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; 944 clocks = <&clks IMX6SX_CLK_USBOH3>; 945 fsl,usbphy = <&usbphy2>; 946 fsl,usbmisc = <&usbmisc 1>; 947 ahb-burst-config = <0x0>; 948 tx-burst-size-dword = <0x10>; 949 rx-burst-size-dword = <0x10>; 950 status = "disabled"; 951 }; 952 953 usbh: usb@2184400 { 954 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; 955 reg = <0x02184400 0x200>; 956 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; 957 clocks = <&clks IMX6SX_CLK_USBOH3>; 958 fsl,usbphy = <&usbphynop1>; 959 fsl,usbmisc = <&usbmisc 2>; 960 phy_type = "hsic"; 961 dr_mode = "host"; 962 ahb-burst-config = <0x0>; 963 tx-burst-size-dword = <0x10>; 964 rx-burst-size-dword = <0x10>; 965 status = "disabled"; 966 }; 967 968 usbmisc: usbmisc@2184800 { 969 #index-cells = <1>; 970 compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc"; 971 reg = <0x02184800 0x200>; 972 clocks = <&clks IMX6SX_CLK_USBOH3>; 973 }; 974 975 fec1: ethernet@2188000 { 976 compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; 977 reg = <0x02188000 0x4000>; 978 interrupt-names = "int0", "pps"; 979 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, 980 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; 981 clocks = <&clks IMX6SX_CLK_ENET>, 982 <&clks IMX6SX_CLK_ENET_AHB>, 983 <&clks IMX6SX_CLK_ENET_PTP>, 984 <&clks IMX6SX_CLK_ENET_REF>, 985 <&clks IMX6SX_CLK_ENET_PTP>; 986 clock-names = "ipg", "ahb", "ptp", 987 "enet_clk_ref", "enet_out"; 988 fsl,num-tx-queues = <3>; 989 fsl,num-rx-queues = <3>; 990 fsl,stop-mode = <&gpr 0x10 3>; 991 status = "disabled"; 992 }; 993 994 mlb: mlb@218c000 { 995 reg = <0x0218c000 0x4000>; 996 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, 997 <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, 998 <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; 999 clocks = <&clks IMX6SX_CLK_MLB>; 1000 status = "disabled"; 1001 }; 1002 1003 usdhc1: mmc@2190000 { 1004 compatible = "fsl,imx6sx-usdhc"; 1005 reg = <0x02190000 0x4000>; 1006 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; 1007 clocks = <&clks IMX6SX_CLK_USDHC1>, 1008 <&clks IMX6SX_CLK_USDHC1>, 1009 <&clks IMX6SX_CLK_USDHC1>; 1010 clock-names = "ipg", "ahb", "per"; 1011 bus-width = <4>; 1012 fsl,tuning-start-tap = <20>; 1013 fsl,tuning-step = <2>; 1014 status = "disabled"; 1015 }; 1016 1017 usdhc2: mmc@2194000 { 1018 compatible = "fsl,imx6sx-usdhc"; 1019 reg = <0x02194000 0x4000>; 1020 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; 1021 clocks = <&clks IMX6SX_CLK_USDHC2>, 1022 <&clks IMX6SX_CLK_USDHC2>, 1023 <&clks IMX6SX_CLK_USDHC2>; 1024 clock-names = "ipg", "ahb", "per"; 1025 bus-width = <4>; 1026 fsl,tuning-start-tap = <20>; 1027 fsl,tuning-step = <2>; 1028 status = "disabled"; 1029 }; 1030 1031 usdhc3: mmc@2198000 { 1032 compatible = "fsl,imx6sx-usdhc"; 1033 reg = <0x02198000 0x4000>; 1034 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; 1035 clocks = <&clks IMX6SX_CLK_USDHC3>, 1036 <&clks IMX6SX_CLK_USDHC3>, 1037 <&clks IMX6SX_CLK_USDHC3>; 1038 clock-names = "ipg", "ahb", "per"; 1039 bus-width = <4>; 1040 fsl,tuning-start-tap = <20>; 1041 fsl,tuning-step = <2>; 1042 status = "disabled"; 1043 }; 1044 1045 usdhc4: mmc@219c000 { 1046 compatible = "fsl,imx6sx-usdhc"; 1047 reg = <0x0219c000 0x4000>; 1048 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; 1049 clocks = <&clks IMX6SX_CLK_USDHC4>, 1050 <&clks IMX6SX_CLK_USDHC4>, 1051 <&clks IMX6SX_CLK_USDHC4>; 1052 clock-names = "ipg", "ahb", "per"; 1053 bus-width = <4>; 1054 status = "disabled"; 1055 }; 1056 1057 i2c1: i2c@21a0000 { 1058 #address-cells = <1>; 1059 #size-cells = <0>; 1060 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; 1061 reg = <0x021a0000 0x4000>; 1062 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 1063 clocks = <&clks IMX6SX_CLK_I2C1>; 1064 status = "disabled"; 1065 }; 1066 1067 i2c2: i2c@21a4000 { 1068 #address-cells = <1>; 1069 #size-cells = <0>; 1070 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; 1071 reg = <0x021a4000 0x4000>; 1072 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 1073 clocks = <&clks IMX6SX_CLK_I2C2>; 1074 status = "disabled"; 1075 }; 1076 1077 i2c3: i2c@21a8000 { 1078 #address-cells = <1>; 1079 #size-cells = <0>; 1080 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; 1081 reg = <0x021a8000 0x4000>; 1082 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; 1083 clocks = <&clks IMX6SX_CLK_I2C3>; 1084 status = "disabled"; 1085 }; 1086 1087 memory-controller@21b0000 { 1088 compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; 1089 reg = <0x021b0000 0x4000>; 1090 clocks = <&clks IMX6SX_CLK_MMDC_P0_IPG>; 1091 }; 1092 1093 fec2: ethernet@21b4000 { 1094 compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; 1095 reg = <0x021b4000 0x4000>; 1096 interrupt-names = "int0", "pps"; 1097 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, 1098 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; 1099 clocks = <&clks IMX6SX_CLK_ENET>, 1100 <&clks IMX6SX_CLK_ENET_AHB>, 1101 <&clks IMX6SX_CLK_ENET_PTP>, 1102 <&clks IMX6SX_CLK_ENET2_REF_125M>, 1103 <&clks IMX6SX_CLK_ENET_PTP>; 1104 clock-names = "ipg", "ahb", "ptp", 1105 "enet_clk_ref", "enet_out"; 1106 fsl,stop-mode = <&gpr 0x10 4>; 1107 status = "disabled"; 1108 }; 1109 1110 weim: memory-controller@21b8000 { 1111 #address-cells = <2>; 1112 #size-cells = <1>; 1113 compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim"; 1114 reg = <0x021b8000 0x4000>; 1115 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 1116 clocks = <&clks IMX6SX_CLK_EIM_SLOW>; 1117 fsl,weim-cs-gpr = <&gpr>; 1118 status = "disabled"; 1119 }; 1120 1121 ocotp: efuse@21bc000 { 1122 #address-cells = <1>; 1123 #size-cells = <1>; 1124 compatible = "fsl,imx6sx-ocotp", "syscon"; 1125 reg = <0x021bc000 0x4000>; 1126 clocks = <&clks IMX6SX_CLK_OCOTP>; 1127 1128 cpu_speed_grade: speed-grade@10 { 1129 reg = <0x10 4>; 1130 }; 1131 1132 tempmon_calib: calib@38 { 1133 reg = <0x38 4>; 1134 }; 1135 1136 tempmon_temp_grade: temp-grade@20 { 1137 reg = <0x20 4>; 1138 }; 1139 }; 1140 1141 sai1: sai@21d4000 { 1142 compatible = "fsl,imx6sx-sai"; 1143 reg = <0x021d4000 0x4000>; 1144 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 1145 clocks = <&clks IMX6SX_CLK_SAI1_IPG>, 1146 <&clks IMX6SX_CLK_SAI1>, 1147 <&clks 0>, <&clks 0>; 1148 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 1149 dma-names = "rx", "tx"; 1150 dmas = <&sdma 31 24 0>, <&sdma 32 24 0>; 1151 status = "disabled"; 1152 }; 1153 1154 audmux: audmux@21d8000 { 1155 compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux"; 1156 reg = <0x021d8000 0x4000>; 1157 status = "disabled"; 1158 }; 1159 1160 sai2: sai@21dc000 { 1161 compatible = "fsl,imx6sx-sai"; 1162 reg = <0x021dc000 0x4000>; 1163 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 1164 clocks = <&clks IMX6SX_CLK_SAI2_IPG>, 1165 <&clks IMX6SX_CLK_SAI2>, 1166 <&clks 0>, <&clks 0>; 1167 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 1168 dma-names = "rx", "tx"; 1169 dmas = <&sdma 33 24 0>, <&sdma 34 24 0>; 1170 status = "disabled"; 1171 }; 1172 1173 qspi1: spi@21e0000 { 1174 #address-cells = <1>; 1175 #size-cells = <0>; 1176 compatible = "fsl,imx6sx-qspi"; 1177 reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; 1178 reg-names = "QuadSPI", "QuadSPI-memory"; 1179 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 1180 clocks = <&clks IMX6SX_CLK_QSPI1>, 1181 <&clks IMX6SX_CLK_QSPI1>; 1182 clock-names = "qspi_en", "qspi"; 1183 status = "disabled"; 1184 }; 1185 1186 qspi2: spi@21e4000 { 1187 #address-cells = <1>; 1188 #size-cells = <0>; 1189 compatible = "fsl,imx6sx-qspi"; 1190 reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>; 1191 reg-names = "QuadSPI", "QuadSPI-memory"; 1192 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; 1193 clocks = <&clks IMX6SX_CLK_QSPI2>, 1194 <&clks IMX6SX_CLK_QSPI2>; 1195 clock-names = "qspi_en", "qspi"; 1196 status = "disabled"; 1197 }; 1198 1199 uart2: serial@21e8000 { 1200 compatible = "fsl,imx6sx-uart", 1201 "fsl,imx6q-uart", "fsl,imx21-uart"; 1202 reg = <0x021e8000 0x4000>; 1203 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; 1204 clocks = <&clks IMX6SX_CLK_UART_IPG>, 1205 <&clks IMX6SX_CLK_UART_SERIAL>; 1206 clock-names = "ipg", "per"; 1207 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; 1208 dma-names = "rx", "tx"; 1209 status = "disabled"; 1210 }; 1211 1212 uart3: serial@21ec000 { 1213 compatible = "fsl,imx6sx-uart", 1214 "fsl,imx6q-uart", "fsl,imx21-uart"; 1215 reg = <0x021ec000 0x4000>; 1216 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; 1217 clocks = <&clks IMX6SX_CLK_UART_IPG>, 1218 <&clks IMX6SX_CLK_UART_SERIAL>; 1219 clock-names = "ipg", "per"; 1220 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; 1221 dma-names = "rx", "tx"; 1222 status = "disabled"; 1223 }; 1224 1225 uart4: serial@21f0000 { 1226 compatible = "fsl,imx6sx-uart", 1227 "fsl,imx6q-uart", "fsl,imx21-uart"; 1228 reg = <0x021f0000 0x4000>; 1229 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; 1230 clocks = <&clks IMX6SX_CLK_UART_IPG>, 1231 <&clks IMX6SX_CLK_UART_SERIAL>; 1232 clock-names = "ipg", "per"; 1233 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; 1234 dma-names = "rx", "tx"; 1235 status = "disabled"; 1236 }; 1237 1238 uart5: serial@21f4000 { 1239 compatible = "fsl,imx6sx-uart", 1240 "fsl,imx6q-uart", "fsl,imx21-uart"; 1241 reg = <0x021f4000 0x4000>; 1242 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; 1243 clocks = <&clks IMX6SX_CLK_UART_IPG>, 1244 <&clks IMX6SX_CLK_UART_SERIAL>; 1245 clock-names = "ipg", "per"; 1246 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; 1247 dma-names = "rx", "tx"; 1248 status = "disabled"; 1249 }; 1250 1251 i2c4: i2c@21f8000 { 1252 #address-cells = <1>; 1253 #size-cells = <0>; 1254 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; 1255 reg = <0x021f8000 0x4000>; 1256 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 1257 clocks = <&clks IMX6SX_CLK_I2C4>; 1258 status = "disabled"; 1259 }; 1260 }; 1261 1262 aips3: bus@2200000 { 1263 compatible = "fsl,aips-bus", "simple-bus"; 1264 #address-cells = <1>; 1265 #size-cells = <1>; 1266 reg = <0x02200000 0x100000>; 1267 ranges; 1268 1269 spba-bus@2240000 { 1270 compatible = "fsl,spba-bus", "simple-bus"; 1271 #address-cells = <1>; 1272 #size-cells = <1>; 1273 reg = <0x02240000 0x40000>; 1274 ranges; 1275 1276 csi1: csi@2214000 { 1277 reg = <0x02214000 0x4000>; 1278 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 1279 clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, 1280 <&clks IMX6SX_CLK_CSI>, 1281 <&clks IMX6SX_CLK_DCIC1>; 1282 clock-names = "disp-axi", "csi_mclk", "dcic"; 1283 status = "disabled"; 1284 }; 1285 1286 pxp: pxp@2218000 { 1287 compatible = "fsl,imx6sx-pxp", "fsl,imx6ull-pxp"; 1288 reg = <0x02218000 0x4000>; 1289 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; 1290 clocks = <&clks IMX6SX_CLK_PXP_AXI>; 1291 clock-names = "axi"; 1292 power-domains = <&pd_disp>; 1293 status = "disabled"; 1294 }; 1295 1296 csi2: csi@221c000 { 1297 reg = <0x0221c000 0x4000>; 1298 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; 1299 clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, 1300 <&clks IMX6SX_CLK_CSI>, 1301 <&clks IMX6SX_CLK_DCIC2>; 1302 clock-names = "disp-axi", "csi_mclk", "dcic"; 1303 status = "disabled"; 1304 }; 1305 1306 lcdif1: lcdif@2220000 { 1307 compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; 1308 reg = <0x02220000 0x4000>; 1309 interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>; 1310 clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, 1311 <&clks IMX6SX_CLK_LCDIF_APB>, 1312 <&clks IMX6SX_CLK_DISPLAY_AXI>; 1313 clock-names = "pix", "axi", "disp_axi"; 1314 assigned-clocks = <&clks IMX6SX_CLK_LCDIF1_PRE_SEL>, 1315 <&clks IMX6SX_CLK_LCDIF1_SEL>; 1316 assigned-clock-parents = <&clks IMX6SX_CLK_PLL5_VIDEO_DIV>, 1317 <&clks IMX6SX_CLK_LCDIF1_PODF>; 1318 power-domains = <&pd_disp>; 1319 status = "disabled"; 1320 1321 port { 1322 lcdif1_to_ldb: endpoint { 1323 }; 1324 }; 1325 }; 1326 1327 lcdif2: lcdif@2224000 { 1328 compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; 1329 reg = <0x02224000 0x4000>; 1330 interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>; 1331 clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>, 1332 <&clks IMX6SX_CLK_LCDIF_APB>, 1333 <&clks IMX6SX_CLK_DISPLAY_AXI>; 1334 clock-names = "pix", "axi", "disp_axi"; 1335 power-domains = <&pd_disp>; 1336 status = "disabled"; 1337 }; 1338 1339 vadc: vadc@2228000 { 1340 reg = <0x02228000 0x4000>, <0x0222c000 0x4000>; 1341 reg-names = "vadc-vafe", "vadc-vdec"; 1342 clocks = <&clks IMX6SX_CLK_VADC>, 1343 <&clks IMX6SX_CLK_CSI>; 1344 clock-names = "vadc", "csi"; 1345 power-domains = <&pd_disp>; 1346 status = "disabled"; 1347 }; 1348 }; 1349 1350 adc1: adc@2280000 { 1351 compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; 1352 reg = <0x02280000 0x4000>; 1353 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; 1354 clocks = <&clks IMX6SX_CLK_IPG>; 1355 clock-names = "adc"; 1356 fsl,adck-max-frequency = <30000000>, <40000000>, 1357 <20000000>; 1358 status = "disabled"; 1359 }; 1360 1361 adc2: adc@2284000 { 1362 compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; 1363 reg = <0x02284000 0x4000>; 1364 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; 1365 clocks = <&clks IMX6SX_CLK_IPG>; 1366 clock-names = "adc"; 1367 fsl,adck-max-frequency = <30000000>, <40000000>, 1368 <20000000>; 1369 status = "disabled"; 1370 }; 1371 1372 wdog3: watchdog@2288000 { 1373 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; 1374 reg = <0x02288000 0x4000>; 1375 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 1376 clocks = <&clks IMX6SX_CLK_IPG>; 1377 status = "disabled"; 1378 }; 1379 1380 ecspi5: spi@228c000 { 1381 #address-cells = <1>; 1382 #size-cells = <0>; 1383 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; 1384 reg = <0x0228c000 0x4000>; 1385 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; 1386 clocks = <&clks IMX6SX_CLK_ECSPI5>, 1387 <&clks IMX6SX_CLK_ECSPI5>; 1388 clock-names = "ipg", "per"; 1389 status = "disabled"; 1390 }; 1391 1392 uart6: serial@22a0000 { 1393 compatible = "fsl,imx6sx-uart", 1394 "fsl,imx6q-uart", "fsl,imx21-uart"; 1395 reg = <0x022a0000 0x4000>; 1396 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; 1397 clocks = <&clks IMX6SX_CLK_UART_IPG>, 1398 <&clks IMX6SX_CLK_UART_SERIAL>; 1399 clock-names = "ipg", "per"; 1400 dmas = <&sdma 0 4 0>, <&sdma 47 4 0>; 1401 dma-names = "rx", "tx"; 1402 status = "disabled"; 1403 }; 1404 1405 pwm5: pwm@22a4000 { 1406 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; 1407 reg = <0x022a4000 0x4000>; 1408 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 1409 clocks = <&clks IMX6SX_CLK_PWM5>, 1410 <&clks IMX6SX_CLK_PWM5>; 1411 clock-names = "ipg", "per"; 1412 #pwm-cells = <3>; 1413 }; 1414 1415 pwm6: pwm@22a8000 { 1416 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; 1417 reg = <0x022a8000 0x4000>; 1418 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 1419 clocks = <&clks IMX6SX_CLK_PWM6>, 1420 <&clks IMX6SX_CLK_PWM6>; 1421 clock-names = "ipg", "per"; 1422 #pwm-cells = <3>; 1423 }; 1424 1425 pwm7: pwm@22ac000 { 1426 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; 1427 reg = <0x022ac000 0x4000>; 1428 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; 1429 clocks = <&clks IMX6SX_CLK_PWM7>, 1430 <&clks IMX6SX_CLK_PWM7>; 1431 clock-names = "ipg", "per"; 1432 #pwm-cells = <3>; 1433 }; 1434 1435 pwm8: pwm@22b0000 { 1436 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; 1437 reg = <0x022b0000 0x4000>; 1438 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 1439 clocks = <&clks IMX6SX_CLK_PWM8>, 1440 <&clks IMX6SX_CLK_PWM8>; 1441 clock-names = "ipg", "per"; 1442 #pwm-cells = <3>; 1443 }; 1444 }; 1445 1446 pcie: pcie@8ffc000 { 1447 compatible = "fsl,imx6sx-pcie"; 1448 reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>; 1449 reg-names = "dbi", "config"; 1450 #address-cells = <3>; 1451 #size-cells = <2>; 1452 device_type = "pci"; 1453 bus-range = <0x00 0xff>; 1454 ranges = <0x81000000 0 0 0x08f80000 0 0x00010000>, /* downstream I/O */ 1455 <0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */ 1456 num-lanes = <1>; 1457 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; 1458 interrupt-names = "msi"; 1459 #interrupt-cells = <1>; 1460 interrupt-map-mask = <0 0 0 0x7>; 1461 interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 1462 <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, 1463 <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, 1464 <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; 1465 clocks = <&clks IMX6SX_CLK_PCIE_AXI>, 1466 <&clks IMX6SX_CLK_LVDS1_OUT>, 1467 <&clks IMX6SX_CLK_PCIE_REF_125M>, 1468 <&clks IMX6SX_CLK_DISPLAY_AXI>; 1469 clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi"; 1470 power-domains = <&pd_disp>, <&pd_pci>; 1471 power-domain-names = "pcie", "pcie_phy"; 1472 status = "disabled"; 1473 }; 1474 }; 1475};
~/
Read-only file preview.