imx6qdl-dfi-fs700-m60.dtsi

  1// SPDX-License-Identifier: GPL-2.0
  2#include <dt-bindings/gpio/gpio.h>
  3
  4/ {
  5	dummy_reg: regulator-dummy {
  6		compatible = "regulator-fixed";
  7		regulator-name = "dummy-supply";
  8	};
  9
 10	reg_usb_otg_vbus: regulator-usb-otg-vbus {
 11		compatible = "regulator-fixed";
 12		regulator-name = "usb_otg_vbus";
 13		regulator-min-microvolt = <5000000>;
 14		regulator-max-microvolt = <5000000>;
 15		gpio = <&gpio3 22 0>;
 16		enable-active-high;
 17	};
 18
 19	chosen {
 20		stdout-path = &uart1;
 21	};
 22};
 23
 24&ecspi3 {
 25	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 26	pinctrl-names = "default";
 27	pinctrl-0 = <&pinctrl_ecspi3>;
 28	status = "okay";
 29
 30	flash: flash@0 {
 31		#address-cells = <1>;
 32		#size-cells = <1>;
 33		compatible = "sst,sst25vf040b", "jedec,spi-nor";
 34		spi-max-frequency = <20000000>;
 35		reg = <0>;
 36	};
 37};
 38
 39&fec {
 40	pinctrl-names = "default";
 41	pinctrl-0 = <&pinctrl_enet>;
 42	status = "okay";
 43	phy-mode = "rgmii";
 44};
 45
 46&iomuxc {
 47	pinctrl-names = "default";
 48	pinctrl-0 = <&pinctrl_hog>;
 49
 50	pinctrl_hog: hoggrp {
 51		fsl,pins = <
 52			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
 53			MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
 54			MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
 55			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
 56		>;
 57	};
 58
 59	pinctrl_enet: enetgrp {
 60		fsl,pins = <
 61			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
 62			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
 63			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
 64			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
 65			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
 66			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 67			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
 68			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
 69			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
 70			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
 71			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
 72			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 73			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 74			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 75			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
 76			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 77		>;
 78	};
 79
 80	pinctrl_i2c2: i2c2grp {
 81		fsl,pins = <
 82			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
 83			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
 84		>;
 85	};
 86
 87	pinctrl_uart1: uart1grp {
 88		fsl,pins = <
 89			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
 90			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
 91		>;
 92	};
 93
 94	pinctrl_usbotg: usbotggrp {
 95		fsl,pins = <
 96			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
 97		>;
 98	};
 99
100	pinctrl_usdhc2: usdhc2grp {
101		fsl,pins = <
102			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
103			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
104			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
105			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
106			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
107			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
108			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
109		>;
110	};
111
112	pinctrl_usdhc3: usdhc3grp {
113		fsl,pins = <
114			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
115			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
116			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
117			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
118			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
119			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
120		>;
121	};
122
123	pinctrl_usdhc4: usdhc4grp {
124		fsl,pins = <
125			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
126			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
127			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
128			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
129			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
130			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
131			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
132			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
133			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
134			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
135		>;
136	};
137
138	pinctrl_ecspi3: ecspi3grp {
139		fsl,pins = <
140			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
141			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
142			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
143			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
144		>;
145	};
146};
147
148&i2c2 {
149	pinctrl-names = "default";
150	pinctrl-0 = <&pinctrl_i2c2>;
151	status = "okay";
152};
153
154&uart1 {
155	pinctrl-names = "default";
156	pinctrl-0 = <&pinctrl_uart1>;
157	status = "okay";
158};
159
160&usbh1 {
161	status = "okay";
162};
163
164&usbotg {
165	vbus-supply = <&reg_usb_otg_vbus>;
166	pinctrl-names = "default";
167	pinctrl-0 = <&pinctrl_usbotg>;
168	disable-over-current;
169	dr_mode = "host";
170	status = "okay";
171};
172
173&usdhc2 { /* module slot */
174	pinctrl-names = "default";
175	pinctrl-0 = <&pinctrl_usdhc2>;
176	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
177	status = "okay";
178};
179
180&usdhc3 { /* baseboard slot */
181	pinctrl-names = "default";
182	pinctrl-0 = <&pinctrl_usdhc3>;
183};
184
185&usdhc4 { /* eMMC */
186	pinctrl-names = "default";
187	pinctrl-0 = <&pinctrl_usdhc4>;
188	bus-width = <8>;
189	non-removable;
190	status = "okay";
191};