kirkwood-nsa3x0-common.dtsi

  1// SPDX-License-Identifier: GPL-2.0
  2#include "kirkwood.dtsi"
  3#include "kirkwood-6281.dtsi"
  4
  5/ {
  6	model = "ZyXEL NSA310";
  7
  8	ocp@f1000000 {
  9		pinctrl: pin-controller@10000 {
 10
 11			pmx_usb_power: pmx-usb-power {
 12				marvell,pins = "mpp21";
 13				marvell,function = "gpio";
 14			};
 15
 16			pmx_pwr_off: pmx-pwr-off {
 17				marvell,pins = "mpp48";
 18				marvell,function = "gpio";
 19			};
 20
 21			pmx_btn_reset: pmx-btn-reset {
 22				marvell,pins = "mpp36";
 23				marvell,function = "gpio";
 24			};
 25
 26			pmx_btn_copy: pmx-btn-copy {
 27				marvell,pins = "mpp37";
 28				marvell,function = "gpio";
 29			};
 30
 31			pmx_btn_power: pmx-btn-power {
 32				marvell,pins = "mpp46";
 33				marvell,function = "gpio";
 34			};
 35
 36			pmx_led_copy_green: pmx-led-copy-green {
 37				marvell,pins = "mpp39";
 38				marvell,function = "gpio";
 39			};
 40
 41			pmx_led_copy_red: pmx-led-copy-red {
 42				marvell,pins = "mpp40";
 43				marvell,function = "gpio";
 44			};
 45		};
 46
 47		serial@12000 {
 48			status = "okay";
 49		};
 50
 51		sata@80000 {
 52			status = "okay";
 53			nr-ports = <2>;
 54		};
 55	};
 56
 57	gpio_poweroff {
 58		compatible = "gpio-poweroff";
 59		pinctrl-0 = <&pmx_pwr_off>;
 60		pinctrl-names = "default";
 61		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 62	};
 63
 64	gpio_keys {
 65		compatible = "gpio-keys";
 66		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
 67		pinctrl-names = "default";
 68
 69		button-power {
 70			label = "Power Button";
 71			linux,code = <KEY_POWER>;
 72			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 73		};
 74		button-copy {
 75			label = "Copy Button";
 76			linux,code = <KEY_COPY>;
 77			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 78		};
 79		button-reset {
 80			label = "Reset Button";
 81			linux,code = <KEY_RESTART>;
 82			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 83		};
 84	};
 85
 86
 87	regulators {
 88		compatible = "simple-bus";
 89		#address-cells = <1>;
 90		#size-cells = <0>;
 91		pinctrl-0 = <&pmx_usb_power>;
 92		pinctrl-names = "default";
 93
 94		usb0_power: regulator@1 {
 95			compatible = "regulator-fixed";
 96			reg = <1>;
 97			regulator-name = "USB Power";
 98			regulator-min-microvolt = <5000000>;
 99			regulator-max-microvolt = <5000000>;
100			regulator-always-on;
101			regulator-boot-on;
102			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
103		};
104	};
105};
106
107&nand {
108	status = "okay";
109	chip-delay = <35>;
110
111	partition@0 {
112		label = "uboot";
113		reg = <0x0000000 0x0100000>;
114		read-only;
115	};
116	partition@100000 {
117		label = "uboot_env";
118		reg = <0x0100000 0x0080000>;
119	};
120	partition@180000 {
121		label = "key_store";
122		reg = <0x0180000 0x0080000>;
123	};
124	partition@200000 {
125		label = "info";
126		reg = <0x0200000 0x0080000>;
127	};
128	partition@280000 {
129		label = "etc";
130		reg = <0x0280000 0x0a00000>;
131	};
132	partition@c80000 {
133		label = "kernel_1";
134		reg = <0x0c80000 0x0a00000>;
135	};
136	partition@1680000 {
137		label = "rootfs1";
138		reg = <0x1680000 0x2fc0000>;
139	};
140	partition@4640000 {
141		label = "kernel_2";
142		reg = <0x4640000 0x0a00000>;
143	};
144	partition@5040000 {
145		label = "rootfs2";
146		reg = <0x5040000 0x2fc0000>;
147	};
148};
149
150&pciec {
151	status = "okay";
152};
153
154&pcie0 {
155	status = "okay";
156};