usb4604.txt

 1SMSC USB4604 High-Speed Hub Controller
 2
 3Required properties:
 4- compatible: Should be "smsc,usb4604"
 5
 6Optional properties:
 7- reg: Specifies the i2c slave address, it is required and should be 0x2d
 8       if I2C is used.
 9- reset-gpios: Should specify GPIO for reset.
10- initial-mode: Should specify initial mode.
11                (1 for HUB mode, 2 for STANDBY mode)
12
13Examples:
14	usb-hub@2d {
15		compatible = "smsc,usb4604";
16		reg = <0x2d>;
17		reset-gpios = <&gpx3 5 1>;
18		initial-mode = <1>;
19	};