File Index
Files and directories
Sign in
FILE

microchip,sama7g5-i2smcc.yaml

File preview with syntax highlighting.

linux-6.19.14/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml YAML
  1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
  2%YAML 1.2
  3---
  4$id: http://devicetree.org/schemas/sound/microchip,sama7g5-i2smcc.yaml#
  5$schema: http://devicetree.org/meta-schemas/core.yaml#
  6
  7title: Microchip I2S Multi-Channel Controller
  8
  9maintainers:
 10  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
 11
 12description:
 13  The I2SMCC complies with the Inter-IC Sound (I2S) bus specification and
 14  supports a Time Division Multiplexed (TDM) interface with external
 15  multi-channel audio codecs. It consists of a receiver, a transmitter and a
 16  common clock generator that can be enabled separately to provide Adapter,
 17  Client or Controller modes with receiver and/or transmitter active.
 18  On later I2SMCC versions (starting with Microchip's SAMA7G5) I2S
 19  multi-channel is supported by using multiple data pins, output and
 20  input, without TDM.
 21
 22properties:
 23  "#sound-dai-cells":
 24    const: 0
 25
 26  compatible:
 27    oneOf:
 28      - enum:
 29          - microchip,sam9x60-i2smcc
 30          - microchip,sama7g5-i2smcc
 31      - items:
 32          - enum:
 33              - microchip,sam9x7-i2smcc
 34          - const: microchip,sam9x60-i2smcc
 35
 36  reg:
 37    maxItems: 1
 38
 39  interrupts:
 40    maxItems: 1
 41
 42  clocks:
 43    items:
 44      - description: Peripheral Bus Clock
 45      - description: Generic Clock (Optional). Should be set mostly when Master
 46          Mode is required.
 47    minItems: 1
 48
 49  clock-names:
 50    items:
 51      - const: pclk
 52      - const: gclk
 53    minItems: 1
 54
 55  dmas:
 56    items:
 57      - description: TX DMA Channel
 58      - description: RX DMA Channel
 59
 60  dma-names:
 61    items:
 62      - const: tx
 63      - const: rx
 64
 65  microchip,tdm-data-pair:
 66    description:
 67      Represents the DIN/DOUT pair pins that are used to receive/send
 68      TDM data. It is optional and it is only needed if the controller
 69      uses the TDM mode.
 70    $ref: /schemas/types.yaml#/definitions/uint8
 71    enum: [0, 1, 2, 3]
 72    default: 0
 73
 74allOf:
 75  - $ref: dai-common.yaml#
 76  - if:
 77      properties:
 78        compatible:
 79          const: microchip,sam9x60-i2smcc
 80    then:
 81      properties:
 82        microchip,tdm-data-pair: false
 83
 84required:
 85  - "#sound-dai-cells"
 86  - compatible
 87  - reg
 88  - interrupts
 89  - clocks
 90  - clock-names
 91  - dmas
 92  - dma-names
 93
 94unevaluatedProperties: false
 95
 96examples:
 97  - |
 98    #include <dt-bindings/dma/at91.h>
 99    #include <dt-bindings/interrupt-controller/arm-gic.h>
100
101    i2s@f001c000 {
102        #sound-dai-cells = <0>;
103        compatible = "microchip,sam9x60-i2smcc";
104        reg = <0xf001c000 0x100>;
105        interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
106        dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
107                       AT91_XDMAC_DT_PERID(36))>,
108               <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
109                       AT91_XDMAC_DT_PERID(37))>;
110        dma-names = "tx", "rx";
111        clocks = <&i2s_clk>, <&i2s_gclk>;
112        clock-names = "pclk", "gclk";
113        pinctrl-names = "default";
114        pinctrl-0 = <&pinctrl_i2s_default>;
115    };
~/ Read-only file preview.