qcom,sm6350-pas.yaml

  1# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
  2%YAML 1.2
  3---
  4$id: http://devicetree.org/schemas/remoteproc/qcom,sm6350-pas.yaml#
  5$schema: http://devicetree.org/meta-schemas/core.yaml#
  6
  7title: Qualcomm SM6350 Peripheral Authentication Service
  8
  9maintainers:
 10  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 11
 12description:
 13  Qualcomm SM6350 SoC Peripheral Authentication Service loads and boots
 14  firmware on the Qualcomm DSP Hexagon cores.
 15
 16properties:
 17  compatible:
 18    enum:
 19      - qcom,sm6350-adsp-pas
 20      - qcom,sm6350-cdsp-pas
 21      - qcom,sm6350-mpss-pas
 22
 23  reg:
 24    maxItems: 1
 25
 26  clocks:
 27    items:
 28      - description: XO clock
 29
 30  clock-names:
 31    items:
 32      - const: xo
 33
 34  qcom,qmp:
 35    $ref: /schemas/types.yaml#/definitions/phandle
 36    description: Reference to the AOSS side-channel message RAM.
 37
 38  memory-region:
 39    maxItems: 1
 40    description: Reference to the reserved-memory for the Hexagon core
 41
 42  smd-edge: false
 43
 44  firmware-name:
 45    maxItems: 1
 46    description: Firmware name for the Hexagon core
 47
 48required:
 49  - compatible
 50  - reg
 51  - memory-region
 52
 53allOf:
 54  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
 55  - if:
 56      properties:
 57        compatible:
 58          enum:
 59            - qcom,sm6350-adsp-pas
 60            - qcom,sm6350-cdsp-pas
 61    then:
 62      properties:
 63        interrupts:
 64          maxItems: 5
 65        interrupt-names:
 66          maxItems: 5
 67    else:
 68      properties:
 69        interrupts:
 70          minItems: 6
 71        interrupt-names:
 72          minItems: 6
 73
 74  - if:
 75      properties:
 76        compatible:
 77          enum:
 78            - qcom,sm6350-adsp-pas
 79    then:
 80      properties:
 81        power-domains:
 82          items:
 83            - description: LCX power domain
 84            - description: LMX power domain
 85        power-domain-names:
 86          items:
 87            - const: lcx
 88            - const: lmx
 89
 90  - if:
 91      properties:
 92        compatible:
 93          enum:
 94            - qcom,sm6350-cdsp-pas
 95    then:
 96      properties:
 97        power-domains:
 98          items:
 99            - description: CX power domain
100            - description: MX power domain
101        power-domain-names:
102          items:
103            - const: cx
104            - const: mx
105
106  - if:
107      properties:
108        compatible:
109          enum:
110            - qcom,sm6350-mpss-pas
111    then:
112      properties:
113        power-domains:
114          items:
115            - description: CX power domain
116            - description: MSS power domain
117        power-domain-names:
118          items:
119            - const: cx
120            - const: mss
121
122unevaluatedProperties: false
123
124examples:
125  - |
126    #include <dt-bindings/clock/qcom,rpmh.h>
127    #include <dt-bindings/interrupt-controller/irq.h>
128    #include <dt-bindings/mailbox/qcom-ipcc.h>
129    #include <dt-bindings/power/qcom-rpmpd.h>
130
131    remoteproc@3000000 {
132        compatible = "qcom,sm6350-adsp-pas";
133        reg = <0x03000000 0x100>;
134
135        clocks = <&rpmhcc RPMH_CXO_CLK>;
136        clock-names = "xo";
137
138        interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
139                              <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
140                              <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
141                              <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
142                              <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
143        interrupt-names = "wdog", "fatal", "ready",
144                          "handover", "stop-ack";
145
146        memory-region = <&pil_adsp_mem>;
147
148        power-domains = <&rpmhpd SM6350_LCX>,
149                        <&rpmhpd SM6350_LMX>;
150        power-domain-names = "lcx", "lmx";
151
152        qcom,qmp = <&aoss_qmp>;
153        qcom,smem-states = <&smp2p_adsp_out 0>;
154        qcom,smem-state-names = "stop";
155
156        glink-edge {
157            interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
158                                         IPCC_MPROC_SIGNAL_GLINK_QMP
159                                         IRQ_TYPE_EDGE_RISING>;
160            mboxes = <&ipcc IPCC_CLIENT_LPASS
161                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
162
163            label = "lpass";
164            qcom,remote-pid = <2>;
165
166            /* ... */
167        };
168    };