allwinner,sun8i-r40-usb-phy.yaml

  1# SPDX-License-Identifier: GPL-2.0
  2%YAML 1.2
  3---
  4$id: http://devicetree.org/schemas/phy/allwinner,sun8i-r40-usb-phy.yaml#
  5$schema: http://devicetree.org/meta-schemas/core.yaml#
  6
  7title: Allwinner R40 USB PHY
  8
  9maintainers:
 10  - Chen-Yu Tsai <wens@csie.org>
 11  - Maxime Ripard <mripard@kernel.org>
 12
 13properties:
 14  "#phy-cells":
 15    const: 1
 16
 17  compatible:
 18    const: allwinner,sun8i-r40-usb-phy
 19
 20  reg:
 21    items:
 22      - description: PHY Control registers
 23      - description: PHY PMU0 registers
 24      - description: PHY PMU1 registers
 25      - description: PHY PMU2 registers
 26
 27  reg-names:
 28    items:
 29      - const: phy_ctrl
 30      - const: pmu0
 31      - const: pmu1
 32      - const: pmu2
 33
 34  clocks:
 35    items:
 36      - description: USB OTG PHY bus clock
 37      - description: USB Host 0 PHY bus clock
 38      - description: USB Host 1 PHY bus clock
 39
 40  clock-names:
 41    items:
 42      - const: usb0_phy
 43      - const: usb1_phy
 44      - const: usb2_phy
 45
 46  resets:
 47    items:
 48      - description: USB OTG reset
 49      - description: USB Host 1 Controller reset
 50      - description: USB Host 2 Controller reset
 51
 52  reset-names:
 53    items:
 54      - const: usb0_reset
 55      - const: usb1_reset
 56      - const: usb2_reset
 57
 58  usb0_id_det-gpios:
 59    maxItems: 1
 60    description: GPIO to the USB OTG ID pin
 61
 62  usb0_vbus_det-gpios:
 63    maxItems: 1
 64    description: GPIO to the USB OTG VBUS detect pin
 65
 66  usb0_vbus_power-supply:
 67    description: Power supply to detect the USB OTG VBUS
 68
 69  usb0_vbus-supply:
 70    description: Regulator controlling USB OTG VBUS
 71
 72  usb1_vbus-supply:
 73    description: Regulator controlling USB1 Host controller
 74
 75  usb2_vbus-supply:
 76    description: Regulator controlling USB2 Host controller
 77
 78required:
 79  - "#phy-cells"
 80  - compatible
 81  - clocks
 82  - clock-names
 83  - reg
 84  - reg-names
 85  - resets
 86  - reset-names
 87
 88additionalProperties: false
 89
 90examples:
 91  - |
 92    #include <dt-bindings/gpio/gpio.h>
 93    #include <dt-bindings/clock/sun8i-r40-ccu.h>
 94    #include <dt-bindings/reset/sun8i-r40-ccu.h>
 95
 96    phy@1c13400 {
 97        #phy-cells = <1>;
 98        compatible = "allwinner,sun8i-r40-usb-phy";
 99        reg = <0x01c13400 0x14>,
100              <0x01c14800 0x4>,
101              <0x01c19800 0x4>,
102              <0x01c1c800 0x4>;
103        reg-names = "phy_ctrl",
104                    "pmu0",
105                    "pmu1",
106                    "pmu2";
107        clocks = <&ccu CLK_USB_PHY0>,
108                 <&ccu CLK_USB_PHY1>,
109                 <&ccu CLK_USB_PHY2>;
110        clock-names = "usb0_phy",
111                      "usb1_phy",
112                      "usb2_phy";
113        resets = <&ccu RST_USB_PHY0>,
114                 <&ccu RST_USB_PHY1>,
115                 <&ccu RST_USB_PHY2>;
116        reset-names = "usb0_reset",
117                      "usb1_reset",
118                      "usb2_reset";
119        usb1_vbus-supply = <&reg_vcc5v0>;
120        usb2_vbus-supply = <&reg_vcc5v0>;
121    };