FILE
rohm,bd96801-pmic.yaml
File preview with syntax highlighting.
linux-6.19.14/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/mfd/rohm,bd96801-pmic.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: ROHM BD96801/BD96805 Scalable Power Management Integrated Circuit 8 9maintainers: 10 - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> 11 12description: 13 BD96801 and BD96805 are automotive grade, single-chip power management ICs. 14 They both integrate 4 buck converters and 3 LDOs with safety features like 15 over-/under voltage and over current detection and a watchdog. 16 17properties: 18 compatible: 19 enum: 20 - rohm,bd96801 21 - rohm,bd96805 22 23 reg: 24 maxItems: 1 25 26 interrupts: 27 description: 28 The PMIC provides intb and errb IRQ lines. The errb IRQ line is used 29 for fatal IRQs which will cause the PMIC to shut down power outputs. 30 In many systems this will shut down the SoC controlling the PMIC and 31 connecting/handling the errb can be omitted. However, there are cases 32 where the SoC is not powered by the PMIC or has a short time backup 33 energy to handle shutdown of critical hardware. In that case it may be 34 useful to connect the errb and handle errb events. 35 minItems: 1 36 maxItems: 2 37 38 interrupt-names: 39 minItems: 1 40 items: 41 - enum: [intb, errb] 42 - const: errb 43 44 rohm,hw-timeout-ms: 45 description: 46 Watchdog timeout value(s). First walue is timeout limit. Second value is 47 optional value for 'too early' watchdog ping if window timeout mode is 48 to be used. 49 minItems: 1 50 maxItems: 2 51 52 rohm,wdg-action: 53 description: 54 Whether the watchdog failure must turn off the regulator power outputs or 55 just toggle the INTB line. 56 enum: 57 - prstb 58 - intb-only 59 60 timeout-sec: true 61 62 regulators: 63 $ref: /schemas/regulator/rohm,bd96801-regulator.yaml 64 description: 65 List of child nodes that specify the regulators. 66 67required: 68 - compatible 69 - reg 70 - interrupts 71 - interrupt-names 72 - regulators 73 74allOf: 75 - $ref: /schemas/watchdog/watchdog.yaml 76 77unevaluatedProperties: false 78 79examples: 80 - | 81 #include <dt-bindings/interrupt-controller/irq.h> 82 #include <dt-bindings/leds/common.h> 83 i2c { 84 #address-cells = <1>; 85 #size-cells = <0>; 86 pmic: pmic@60 { 87 reg = <0x60>; 88 compatible = "rohm,bd96801"; 89 interrupt-parent = <&gpio1>; 90 interrupts = <29 IRQ_TYPE_LEVEL_LOW>, <6 IRQ_TYPE_LEVEL_LOW>; 91 interrupt-names = "intb", "errb"; 92 93 regulators { 94 buck1 { 95 regulator-name = "buck1"; 96 regulator-ramp-delay = <1250>; 97 /* 0.5V min INITIAL - 150 mV tune */ 98 regulator-min-microvolt = <350000>; 99 /* 3.3V + 150mV tune */ 100 regulator-max-microvolt = <3450000>; 101 102 /* These can be set only when PMIC is in STBY */ 103 rohm,initial-voltage-microvolt = <500000>; 104 regulator-ov-error-microvolt = <230000>; 105 regulator-uv-error-microvolt = <230000>; 106 regulator-temp-protection-kelvin = <1>; 107 regulator-temp-warn-kelvin = <0>; 108 }; 109 buck2 { 110 regulator-name = "buck2"; 111 regulator-min-microvolt = <350000>; 112 regulator-max-microvolt = <3450000>; 113 114 rohm,initial-voltage-microvolt = <3000000>; 115 regulator-ov-error-microvolt = <18000>; 116 regulator-uv-error-microvolt = <18000>; 117 regulator-temp-protection-kelvin = <1>; 118 regulator-temp-warn-kelvin = <1>; 119 }; 120 buck3 { 121 regulator-name = "buck3"; 122 regulator-min-microvolt = <350000>; 123 regulator-max-microvolt = <3450000>; 124 125 rohm,initial-voltage-microvolt = <600000>; 126 regulator-ov-warn-microvolt = <18000>; 127 regulator-uv-warn-microvolt = <18000>; 128 regulator-temp-protection-kelvin = <1>; 129 regulator-temp-error-kelvin = <0>; 130 }; 131 buck4 { 132 regulator-name = "buck4"; 133 regulator-min-microvolt = <350000>; 134 regulator-max-microvolt = <3450000>; 135 136 rohm,initial-voltage-microvolt = <600000>; 137 regulator-ov-warn-microvolt = <18000>; 138 regulator-uv-warn-microvolt = <18000>; 139 regulator-temp-protection-kelvin = <1>; 140 regulator-temp-error-kelvin = <0>; 141 }; 142 ldo5 { 143 regulator-name = "ldo5"; 144 regulator-min-microvolt = <300000>; 145 regulator-max-microvolt = <3300000>; 146 147 rohm,initial-voltage-microvolt = <500000>; 148 regulator-ov-error-microvolt = <36000>; 149 regulator-uv-error-microvolt = <34000>; 150 regulator-temp-protection-kelvin = <1>; 151 regulator-temp-warn-kelvin = <0>; 152 }; 153 ldo6 { 154 regulator-name = "ldo6"; 155 regulator-min-microvolt = <300000>; 156 regulator-max-microvolt = <3300000>; 157 158 rohm,initial-voltage-microvolt = <300000>; 159 regulator-ov-error-microvolt = <36000>; 160 regulator-uv-error-microvolt = <34000>; 161 regulator-temp-protection-kelvin = <1>; 162 regulator-temp-warn-kelvin = <0>; 163 }; 164 ldo7 { 165 regulator-name = "ldo7"; 166 regulator-min-microvolt = <300000>; 167 regulator-max-microvolt = <3300000>; 168 169 rohm,initial-voltage-microvolt = <500000>; 170 regulator-ov-error-microvolt = <36000>; 171 regulator-uv-error-microvolt = <34000>; 172 regulator-temp-protection-kelvin = <1>; 173 regulator-temp-warn-kelvin = <0>; 174 }; 175 }; 176 }; 177 };
~/
Read-only file preview.