sony,imx283.yaml

  1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
  2# Copyright (C) 2024 Ideas on Board Oy
  3%YAML 1.2
  4---
  5$id: http://devicetree.org/schemas/media/i2c/sony,imx283.yaml#
  6$schema: http://devicetree.org/meta-schemas/core.yaml#
  7
  8title: Sony IMX283 Sensor
  9
 10maintainers:
 11  - Kieran Bingham <kieran.bingham@ideasonboard.com>
 12  - Umang Jain <umang.jain@ideasonboard.com>
 13
 14description:
 15  IMX283 sensor is a Sony CMOS active pixel digital image sensor with an active
 16  array size of 5472H x 3648V. It is programmable through I2C interface. The
 17  I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
 18  sent through MIPI CSI-2.
 19
 20properties:
 21  compatible:
 22    const: sony,imx283
 23
 24  reg:
 25    maxItems: 1
 26
 27  clocks:
 28    description: Clock frequency from 6 to 24 MHz.
 29    maxItems: 1
 30
 31  vadd-supply:
 32    description: Analog power supply (2.9V)
 33
 34  vdd1-supply:
 35    description: Interface power supply (1.8V)
 36
 37  vdd2-supply:
 38    description: Digital power supply (1.2V)
 39
 40  reset-gpios:
 41    description: Sensor reset (XCLR) GPIO
 42    maxItems: 1
 43
 44  port:
 45    $ref: /schemas/graph.yaml#/$defs/port-base
 46    additionalProperties: false
 47
 48    properties:
 49      endpoint:
 50        $ref: /schemas/media/video-interfaces.yaml#
 51        unevaluatedProperties: false
 52
 53        properties:
 54          data-lanes:
 55            anyOf:
 56              - items:
 57                  - const: 1
 58                  - const: 2
 59                  - const: 3
 60                  - const: 4
 61
 62          link-frequencies: true
 63
 64        required:
 65          - data-lanes
 66          - link-frequencies
 67
 68    required:
 69      - endpoint
 70
 71required:
 72  - compatible
 73  - reg
 74  - clocks
 75  - port
 76
 77additionalProperties: false
 78
 79examples:
 80  - |
 81    i2c {
 82        #address-cells = <1>;
 83        #size-cells = <0>;
 84
 85        camera@1a {
 86            compatible = "sony,imx283";
 87            reg = <0x1a>;
 88            clocks = <&imx283_clk>;
 89
 90            assigned-clocks = <&imx283_clk>;
 91            assigned-clock-parents = <&imx283_clk_parent>;
 92            assigned-clock-rates = <12000000>;
 93
 94            vadd-supply = <&camera_vadd_2v9>;
 95            vdd1-supply = <&camera_vdd1_1v8>;
 96            vdd2-supply = <&camera_vdd2_1v2>;
 97
 98            port {
 99                imx283: endpoint {
100                    remote-endpoint = <&cam>;
101                    data-lanes = <1 2 3 4>;
102                    link-frequencies = /bits/ 64 <360000000>;
103                };
104            };
105        };
106    };
107...