File Index
Files and directories
Sign in
FILE

sony,imx219.yaml

File preview with syntax highlighting.

linux-6.19.14/Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml YAML
  1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
  2%YAML 1.2
  3---
  4$id: http://devicetree.org/schemas/media/i2c/sony,imx219.yaml#
  5$schema: http://devicetree.org/meta-schemas/core.yaml#
  6
  7title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
  8
  9maintainers:
 10  - Dave Stevenson <dave.stevenson@raspberrypi.com>
 11
 12description: |-
 13  The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor
 14  with an active array size of 3280H x 2464V. It is programmable through
 15  I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet.
 16  Image data is sent through MIPI CSI-2, which is configured as either 2 or
 17  4 data lanes.
 18
 19allOf:
 20  - $ref: /schemas/media/video-interface-devices.yaml#
 21
 22properties:
 23  compatible:
 24    const: sony,imx219
 25
 26  reg:
 27    description: I2C device address
 28    maxItems: 1
 29
 30  clocks:
 31    maxItems: 1
 32
 33  VDIG-supply:
 34    description:
 35      Digital I/O voltage supply, 1.8 volts
 36
 37  VANA-supply:
 38    description:
 39      Analog voltage supply, 2.8 volts
 40
 41  VDDL-supply:
 42    description:
 43      Digital core voltage supply, 1.2 volts
 44
 45  reset-gpios:
 46    maxItems: 1
 47    description: |-
 48      Reference to the GPIO connected to the xclr pin, if any.
 49      Must be released (set high) after all supplies are applied.
 50
 51  port:
 52    $ref: /schemas/graph.yaml#/$defs/port-base
 53    additionalProperties: false
 54
 55    properties:
 56      endpoint:
 57        $ref: /schemas/media/video-interfaces.yaml#
 58        unevaluatedProperties: false
 59
 60        properties:
 61          data-lanes:
 62            description: |-
 63              The sensor supports either two-lane, or four-lane operation.
 64              If this property is omitted four-lane operation is assumed.
 65              For two-lane operation the property must be set to <1 2>.
 66            items:
 67              - const: 1
 68              - const: 2
 69
 70          clock-noncontinuous: true
 71          link-frequencies: true
 72
 73        required:
 74          - link-frequencies
 75
 76required:
 77  - compatible
 78  - reg
 79  - clocks
 80  - VANA-supply
 81  - VDIG-supply
 82  - VDDL-supply
 83  - port
 84
 85unevaluatedProperties: false
 86
 87examples:
 88  - |
 89    i2c {
 90        #address-cells = <1>;
 91        #size-cells = <0>;
 92
 93        imx219: sensor@10 {
 94            compatible = "sony,imx219";
 95            reg = <0x10>;
 96            clocks = <&imx219_clk>;
 97            VANA-supply = <&imx219_vana>;   /* 2.8v */
 98            VDIG-supply = <&imx219_vdig>;   /* 1.8v */
 99            VDDL-supply = <&imx219_vddl>;   /* 1.2v */
100
101            port {
102                imx219_0: endpoint {
103                    remote-endpoint = <&csi1_ep>;
104                    data-lanes = <1 2>;
105                    clock-noncontinuous;
106                    link-frequencies = /bits/ 64 <456000000>;
107                };
108            };
109        };
110    };
111
112...
~/ Read-only file preview.