sony,imx111.yaml

  1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
  2%YAML 1.2
  3---
  4$id: http://devicetree.org/schemas/media/i2c/sony,imx111.yaml#
  5$schema: http://devicetree.org/meta-schemas/core.yaml#
  6
  7title: Sony IMX111 8MP CMOS Digital Image Sensor
  8
  9maintainers:
 10  - Svyatoslav Ryhel <clamor95@gmail.com>
 11
 12description:
 13  IMX111 sensor is a Sony CMOS active pixel digital image sensor with an active
 14  array size of 2464H x 3280V. It is programmable through I2C interface. Image
 15  data is sent through MIPI CSI-2, through 1 or 2 lanes.
 16
 17allOf:
 18  - $ref: /schemas/media/video-interface-devices.yaml#
 19  - $ref: /schemas/nvmem/nvmem-consumer.yaml#
 20
 21properties:
 22  compatible:
 23    const: sony,imx111
 24
 25  reg:
 26    maxItems: 1
 27
 28  clocks:
 29    description: EXTCLK with possible frequency from 6 to 54 MHz
 30    maxItems: 1
 31
 32  reset-gpios:
 33    maxItems: 1
 34
 35  iovdd-supply:
 36    description: Digital IO power supply (1.8V)
 37
 38  dvdd-supply:
 39    description: Digital power supply (1.2V)
 40
 41  avdd-supply:
 42    description: Analog power supply (2.7V)
 43
 44  port:
 45    additionalProperties: false
 46    $ref: /schemas/graph.yaml#/$defs/port-base
 47
 48    properties:
 49      endpoint:
 50        $ref: /schemas/media/video-interfaces.yaml#
 51        unevaluatedProperties: false
 52
 53        required:
 54          - data-lanes
 55          - link-frequencies
 56
 57    required:
 58      - endpoint
 59
 60required:
 61  - compatible
 62  - reg
 63  - clocks
 64  - port
 65
 66unevaluatedProperties: false
 67
 68examples:
 69  - |
 70    #include <dt-bindings/gpio/gpio.h>
 71    #include <dt-bindings/media/video-interfaces.h>
 72
 73    i2c {
 74        #address-cells = <1>;
 75        #size-cells = <0>;
 76
 77        camera@10 {
 78            compatible = "sony,imx111";
 79            reg = <0x10>;
 80
 81            clocks = <&imx111_clk>;
 82
 83            iovdd-supply = <&camera_vddio_1v8>;
 84            dvdd-supply = <&camera_vddd_1v2>;
 85            avdd-supply = <&camera_vdda_2v7>;
 86
 87            orientation = <1>;
 88            rotation = <90>;
 89
 90            nvmem = <&eeprom>;
 91            flash-leds = <&led>;
 92            lens-focus = <&vcm>;
 93
 94            reset-gpios = <&gpio 84 GPIO_ACTIVE_LOW>;
 95
 96            port {
 97                imx111_output: endpoint {
 98                    data-lanes = <1 2>;
 99                    link-frequencies = /bits/ 64 <542400000>;
100                    remote-endpoint = <&csi_input>;
101                };
102            };
103        };
104    };
105...