FILE
ovti,ov8858.yaml
File preview with syntax highlighting.
linux-6.19.14/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/media/i2c/ovti,ov8858.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: OmniVision OV8858 Image Sensor 8 9maintainers: 10 - Jacopo Mondi <jacopo.mondi@ideasonboard.com> 11 - Nicholas Roth <nicholas@rothemail.net> 12 13description: | 14 The OmniVision OV8858 is a color CMOS 8 Megapixels (3264x2448) image sensor 15 controlled through an I2C-compatible SCCB bus. The sensor transmits images 16 on a MIPI CSI-2 output interface with up to 4 data lanes. 17 18$ref: /schemas/media/video-interface-devices.yaml# 19 20properties: 21 compatible: 22 const: ovti,ov8858 23 24 reg: 25 maxItems: 1 26 27 clocks: 28 maxItems: 1 29 description: XVCLK external clock 30 31 clock-names: 32 const: xvclk 33 34 dvdd-supply: 35 description: Digital Domain Power Supply 36 37 avdd-supply: 38 description: Analog Domain Power Supply 39 40 dovdd-supply: 41 description: I/O Domain Power Supply 42 43 powerdown-gpios: 44 description: PWDNB powerdown GPIO (active low) 45 46 reset-gpios: 47 maxItems: 1 48 description: XSHUTDN reset GPIO (active low) 49 50 port: 51 description: MIPI CSI-2 transmitter port 52 $ref: /schemas/graph.yaml#/$defs/port-base 53 additionalProperties: false 54 55 properties: 56 endpoint: 57 $ref: /schemas/media/video-interfaces.yaml# 58 unevaluatedProperties: false 59 60 properties: 61 data-lanes: 62 minItems: 1 63 maxItems: 4 64 65 required: 66 - data-lanes 67 68required: 69 - compatible 70 - reg 71 - clocks 72 - port 73 74unevaluatedProperties: false 75 76examples: 77 - | 78 #include <dt-bindings/pinctrl/rockchip.h> 79 #include <dt-bindings/clock/rk3399-cru.h> 80 #include <dt-bindings/gpio/gpio.h> 81 82 i2c { 83 #address-cells = <1>; 84 #size-cells = <0>; 85 86 ov8858: camera@36 { 87 compatible = "ovti,ov8858"; 88 reg = <0x36>; 89 90 clocks = <&cru SCLK_CIF_OUT>; 91 clock-names = "xvclk"; 92 assigned-clocks = <&cru SCLK_CIF_OUT>; 93 assigned-clock-rates = <24000000>; 94 95 dovdd-supply = <&vcc1v8_dvp>; 96 97 reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>; 98 powerdown-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>; 99 100 port { 101 ucam_out: endpoint { 102 remote-endpoint = <&mipi_in_ucam>; 103 data-lanes = <1 2 3 4>; 104 }; 105 }; 106 }; 107 }; 108...
~/
Read-only file preview.