File Index
Files and directories
Sign in
FILE

ti,tps61310.yaml

File preview with syntax highlighting.

linux-6.19.14/Documentation/devicetree/bindings/leds/ti,tps61310.yaml YAML
  1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
  2%YAML 1.2
  3---
  4$id: http://devicetree.org/schemas/leds/ti,tps61310.yaml#
  5$schema: http://devicetree.org/meta-schemas/core.yaml#
  6
  7title: Texas Instruments TPS6131X flash LED driver
  8
  9maintainers:
 10  - Matthias Fend <matthias.fend@emfend.at>
 11
 12description: |
 13  The TPS61310/TPS61311 is a flash LED driver with I2C interface.
 14  Its power stage is capable of supplying a maximum total current of roughly 1500mA.
 15  The TPS6131x provides three constant-current sinks, capable of sinking
 16  up to 2 x 400mA (LED1 and LED3) and 800mA (LED2) in flash mode.
 17  In torch mode, each sink (LED1, LED2, LED3) supports currents up to 175mA.
 18  Since the three current sinks share most of the control components such as
 19  flash timer, control logic, safety timer and the operating mode, they cannot
 20  be used completely independently of each other. Therefore, only one LED is
 21  supported, but the current sinks can be combined accordingly.
 22
 23  The data sheet can be found at:
 24    https://www.ti.com/lit/ds/symlink/tps61310.pdf
 25
 26properties:
 27  compatible:
 28    oneOf:
 29      - items:
 30          - enum:
 31              - ti,tps61311
 32          - const: ti,tps61310
 33      - items:
 34          - const: ti,tps61310
 35
 36  reg:
 37    maxItems: 1
 38
 39  reset-gpios:
 40    maxItems: 1
 41    description: GPIO connected to NRESET pin
 42
 43  ti,valley-current-limit:
 44    type: boolean
 45    description:
 46      Reduce the valley peak current limit from 1750mA to 1250mA (TPS61310) or
 47      from 2480mA to 1800mA (TPS61311).
 48
 49  led:
 50    type: object
 51    $ref: common.yaml#
 52    unevaluatedProperties: false
 53
 54    properties:
 55      led-sources:
 56        minItems: 1
 57        maxItems: 3
 58        items:
 59          enum: [1, 2, 3]
 60
 61      led-max-microamp:
 62        oneOf:
 63          - minimum: 50000
 64            maximum: 350000
 65            multipleOf: 50000
 66          - minimum: 25000
 67            maximum: 525000
 68            multipleOf: 25000
 69
 70      flash-max-microamp:
 71        oneOf:
 72          - minimum: 50000
 73            maximum: 800000
 74            multipleOf: 50000
 75          - minimum: 25000
 76            maximum: 1500000
 77            multipleOf: 25000
 78
 79      flash-max-timeout-us:
 80        enum: [ 5300, 10700, 16000, 21300, 26600, 32000, 37300, 68200, 71500,
 81                102200, 136300, 170400, 204500, 340800, 579300, 852000 ]
 82
 83    required:
 84      - led-sources
 85      - led-max-microamp
 86      - flash-max-microamp
 87      - flash-max-timeout-us
 88
 89required:
 90  - compatible
 91  - reg
 92  - led
 93
 94additionalProperties: false
 95
 96examples:
 97  - |
 98    #include <dt-bindings/leds/common.h>
 99    #include <dt-bindings/gpio/gpio.h>
100
101    i2c {
102      #address-cells = <1>;
103      #size-cells = <0>;
104
105      led-controller@33 {
106        compatible = "ti,tps61311", "ti,tps61310";
107        reg = <0x33>;
108
109        reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
110
111        led {
112          function = LED_FUNCTION_FLASH;
113          color = <LED_COLOR_ID_WHITE>;
114          led-sources = <1>, <2>, <3>;
115          led-max-microamp = <525000>;
116          flash-max-microamp = <1500000>;
117          flash-max-timeout-us = <852000>;
118        };
119      };
120    };
~/ Read-only file preview.