adi,adxl355.yaml

 1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 2%YAML 1.2
 3---
 4$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
 5$schema: http://devicetree.org/meta-schemas/core.yaml#
 6
 7title: Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers
 8
 9maintainers:
10  - Puranjay Mohan <puranjay12@gmail.com>
11
12description: |
13  Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers that
14  support both I2C & SPI interfaces
15    https://www.analog.com/en/products/adxl355.html
16    https://www.analog.com/en/products/adxl359.html
17
18properties:
19  compatible:
20    enum:
21      - adi,adxl355
22      - adi,adxl359
23
24  reg:
25    maxItems: 1
26
27  interrupts:
28    minItems: 1
29    maxItems: 3
30    description: |
31      Type for DRDY should be IRQ_TYPE_EDGE_RISING.
32      Three configurable interrupt lines exist.
33
34  interrupt-names:
35    description: Specify which interrupt line is in use.
36    items:
37      enum:
38        - INT1
39        - INT2
40        - DRDY
41    minItems: 1
42    maxItems: 3
43
44  vdd-supply:
45    description: Regulator that provides power to the sensor
46
47  vddio-supply:
48    description: Regulator that provides power to the bus
49
50required:
51  - compatible
52  - reg
53
54allOf:
55  - $ref: /schemas/spi/spi-peripheral-props.yaml#
56
57unevaluatedProperties: false
58
59examples:
60  - |
61    #include <dt-bindings/interrupt-controller/irq.h>
62    i2c {
63        #address-cells = <1>;
64        #size-cells = <0>;
65
66        /* Example for a I2C device node */
67        accelerometer@1d {
68            compatible = "adi,adxl355";
69            reg = <0x1d>;
70            interrupt-parent = <&gpio>;
71            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
72            interrupt-names = "DRDY";
73        };
74    };
75  - |
76    #include <dt-bindings/interrupt-controller/irq.h>
77    spi {
78        #address-cells = <1>;
79        #size-cells = <0>;
80
81        accelerometer@0 {
82            compatible = "adi,adxl355";
83            reg = <0>;
84            spi-max-frequency = <1000000>;
85            interrupt-parent = <&gpio>;
86            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
87            interrupt-names = "DRDY";
88        };
89    };