lm75.yaml

  1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
  2%YAML 1.2
  3---
  4$id: http://devicetree.org/schemas/hwmon/lm75.yaml#
  5$schema: http://devicetree.org/meta-schemas/core.yaml#
  6
  7title: LM75 hwmon sensor
  8
  9maintainers:
 10  - Jean Delvare <jdelvare@suse.com>
 11  - Guenter Roeck <linux@roeck-us.net>
 12
 13properties:
 14  compatible:
 15    enum:
 16      - adi,adt75
 17      - ams,as6200
 18      - atmel,at30ts74
 19      - dallas,ds1775
 20      - dallas,ds75
 21      - dallas,ds7505
 22      - gmt,g751
 23      - national,lm75
 24      - national,lm75a
 25      - national,lm75b
 26      - maxim,max6625
 27      - maxim,max6626
 28      - maxim,max31725
 29      - maxim,max31726
 30      - maxim,mcp980x
 31      - nxp,p3t1750
 32      - nxp,p3t1755
 33      - nxp,pct2075
 34      - st,stds75
 35      - st,stlm75
 36      - microchip,tcn75
 37      - ti,tmp1075
 38      - ti,tmp100
 39      - ti,tmp101
 40      - ti,tmp105
 41      - ti,tmp112
 42      - ti,tmp175
 43      - ti,tmp275
 44      - ti,tmp75
 45      - ti,tmp75b
 46      - ti,tmp75c
 47
 48  reg:
 49    maxItems: 1
 50
 51  vs-supply:
 52    description: phandle to the regulator that provides the +VS supply
 53
 54  interrupts:
 55    maxItems: 1
 56
 57required:
 58  - compatible
 59  - reg
 60
 61allOf:
 62  - $ref: hwmon-common.yaml#
 63  - if:
 64      not:
 65        properties:
 66          compatible:
 67            contains:
 68              enum:
 69                - ams,as6200
 70                - ti,tmp100
 71                - ti,tmp101
 72                - ti,tmp112
 73                - ti,tmp75
 74    then:
 75      properties:
 76        interrupts: false
 77
 78unevaluatedProperties: false
 79
 80examples:
 81  - |
 82    i2c {
 83      #address-cells = <1>;
 84      #size-cells = <0>;
 85
 86      sensor@48 {
 87        compatible = "st,stlm75";
 88        reg = <0x48>;
 89        vs-supply = <&vs>;
 90      };
 91    };
 92  - |
 93    #include <dt-bindings/interrupt-controller/irq.h>
 94    i2c {
 95      #address-cells = <1>;
 96      #size-cells = <0>;
 97
 98      temperature-sensor@48 {
 99        compatible = "ams,as6200";
100        reg = <0x48>;
101        vs-supply = <&vs>;
102        interrupt-parent = <&gpio1>;
103        interrupts = <17 IRQ_TYPE_EDGE_BOTH>;
104      };
105    };