panel-edp-legacy.yaml

  1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
  2%YAML 1.2
  3---
  4$id: http://devicetree.org/schemas/display/panel/panel-edp-legacy.yaml#
  5$schema: http://devicetree.org/meta-schemas/core.yaml#
  6
  7title: Legacy eDP panels from before the "edp-panel" compatible
  8
  9maintainers:
 10  - Douglas Anderson <dianders@chromium.org>
 11
 12description: |
 13  This binding file is a collection of eDP panels from before the generic
 14  "edp-panel" compatible was introduced. It is kept around to support old
 15  dts files. The only reason one might add a new panel here instead of using
 16  the generic "edp-panel" is if it needed to be used on an eDP controller
 17  that doesn't support the generic "edp-panel" compatible, but it should be
 18  a strong preference to add the generic "edp-panel" compatible instead.
 19
 20allOf:
 21  - $ref: panel-common.yaml#
 22
 23properties:
 24  compatible:
 25    enum:
 26    # compatible must be listed in alphabetical order, ordered by compatible.
 27    # The description in the comment is mandatory for each compatible.
 28
 29        # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
 30      - auo,b101ean01
 31        # AUO B116XAK01 eDP TFT LCD panel
 32      - auo,b116xa01
 33        # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
 34      - auo,b133htn01
 35        # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
 36      - auo,b133xtn01
 37        # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
 38      - boe,nv101wxmn51
 39        # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel
 40      - boe,nv110wtm-n61
 41        # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel
 42      - boe,nv133fhm-n61
 43        # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel
 44      - boe,nv133fhm-n62
 45        # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
 46      - boe,nv140fhmn49
 47        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
 48      - innolux,n116bca-ea1
 49        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
 50      - innolux,n116bge
 51        # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel
 52      - innolux,n125hce-gn1
 53        # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
 54      - innolux,p120zdg-bf1
 55        # King & Display KD116N21-30NV-A010 eDP TFT LCD panel
 56      - kingdisplay,kd116n21-30nv-a010
 57        # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
 58      - lg,lp079qx1-sp0v
 59        # LG 9.7" (2048x1536 pixels) TFT LCD panel
 60      - lg,lp097qx1-spa1
 61        # LG 12.0" (1920x1280 pixels) TFT LCD panel
 62      - lg,lp120up1
 63        # LG 12.9" (2560x1700 pixels) TFT LCD panel
 64      - lg,lp129qe
 65        # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel
 66      - neweast,wjfh116008a
 67        # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
 68      - samsung,lsn122dl01-c01
 69        # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
 70      - samsung,ltn140at29-301
 71        # Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
 72      - sharp,ld-d5116z01b
 73        # Sharp 12.3" (2400x1600 pixels) TFT LCD panel
 74      - sharp,lq123p1jx31
 75
 76  backlight: true
 77  ddc-i2c-bus: true
 78  enable-gpios: true
 79  panel-timing: true
 80  port: true
 81  power-supply: true
 82  no-hpd: true
 83  hpd-gpios: true
 84
 85additionalProperties: false
 86
 87required:
 88  - compatible
 89  - power-supply
 90
 91examples:
 92  - |
 93    panel: panel {
 94      compatible = "innolux,n116bge";
 95      power-supply = <&panel_regulator>;
 96      backlight = <&backlight>;
 97
 98      panel-timing {
 99        clock-frequency = <74250000>;
100        hactive = <1366>;
101        hfront-porch = <136>;
102        hback-porch = <60>;
103        hsync-len = <30>;
104        hsync-active = <0>;
105        vactive = <768>;
106        vfront-porch = <8>;
107        vback-porch = <12>;
108        vsync-len = <12>;
109        vsync-active = <0>;
110      };
111
112      port {
113        panel_in_edp: endpoint {
114          remote-endpoint = <&edp_out_panel>;
115        };
116      };
117    };