FILE
sysfs-driver-ufs
File preview with syntax highlighting.
linux-6.19.14/Documentation/ABI/testing/sysfs-driver-ufs
1What: /sys/bus/*/drivers/ufshcd/*/auto_hibern8 2Date: March 2018 3Contact: linux-scsi@vger.kernel.org 4Description: 5 This file contains the auto-hibernate idle timer setting of a 6 UFS host controller. A value of '0' means auto-hibernate is not 7 enabled. Otherwise the value is the number of microseconds of 8 idle time before the UFS host controller will autonomously put 9 the link into hibernate state. That will save power at the 10 expense of increased latency. Note that the hardware supports 11 10-bit values with a power-of-ten multiplier which allows a 12 maximum value of 102300000. Refer to the UFS Host Controller 13 Interface specification for more details. 14 15What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_type 16What: /sys/bus/platform/devices/*.ufs/device_descriptor/device_type 17Date: February 2018 18Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 19Description: This file shows the device type. This is one of the UFS 20 device descriptor parameters. The full information about 21 the descriptor could be found at UFS specifications 2.1. 22 23 The file is read only. 24 25What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class 26What: /sys/bus/platform/devices/*.ufs/device_descriptor/device_class 27Date: February 2018 28Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 29Description: This file shows the device class. This is one of the UFS 30 device descriptor parameters. The full information about 31 the descriptor could be found at UFS specifications 2.1. 32 33 The file is read only. 34 35What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class 36What: /sys/bus/platform/devices/*.ufs/device_descriptor/device_sub_class 37Date: February 2018 38Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 39Description: This file shows the UFS storage subclass. This is one of 40 the UFS device descriptor parameters. The full information 41 about the descriptor could be found at UFS specifications 2.1. 42 43 The file is read only. 44 45What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol 46What: /sys/bus/platform/devices/*.ufs/device_descriptor/protocol 47Date: February 2018 48Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 49Description: This file shows the protocol supported by an UFS device. 50 This is one of the UFS device descriptor parameters. 51 The full information about the descriptor could be found 52 at UFS specifications 2.1. 53 54 The file is read only. 55 56What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns 57What: /sys/bus/platform/devices/*.ufs/device_descriptor/number_of_luns 58Date: February 2018 59Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 60Description: This file shows number of logical units. This is one of 61 the UFS device descriptor parameters. The full information 62 about the descriptor could be found at UFS specifications 2.1. 63 64 The file is read only. 65 66What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns 67What: /sys/bus/platform/devices/*.ufs/device_descriptor/number_of_wluns 68Date: February 2018 69Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 70Description: This file shows number of well known logical units. 71 This is one of the UFS device descriptor parameters. 72 The full information about the descriptor could be found 73 at UFS specifications 2.1. 74 75 The file is read only. 76 77What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable 78What: /sys/bus/platform/devices/*.ufs/device_descriptor/boot_enable 79Date: February 2018 80Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 81Description: This file shows value that indicates whether the device is 82 enabled for boot. This is one of the UFS device descriptor 83 parameters. The full information about the descriptor could 84 be found at UFS specifications 2.1. 85 86 The file is read only. 87 88What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable 89What: /sys/bus/platform/devices/*.ufs/device_descriptor/descriptor_access_enable 90Date: February 2018 91Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 92Description: This file shows value that indicates whether the device 93 descriptor could be read after partial initialization phase 94 of the boot sequence. This is one of the UFS device descriptor 95 parameters. The full information about the descriptor could 96 be found at UFS specifications 2.1. 97 98 The file is read only. 99 100What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode 101What: /sys/bus/platform/devices/*.ufs/device_descriptor/initial_power_mode 102Date: February 2018 103Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 104Description: This file shows value that defines the power mode after 105 device initialization or hardware reset. This is one of 106 the UFS device descriptor parameters. The full information 107 about the descriptor could be found at UFS specifications 2.1. 108 109 The file is read only. 110 111What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun 112What: /sys/bus/platform/devices/*.ufs/device_descriptor/high_priority_lun 113Date: February 2018 114Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 115Description: This file shows the high priority lun. This is one of 116 the UFS device descriptor parameters. The full information 117 about the descriptor could be found at UFS specifications 2.1. 118 119 The file is read only. 120 121What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type 122What: /sys/bus/platform/devices/*.ufs/device_descriptor/secure_removal_type 123Date: February 2018 124Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 125Description: This file shows the secure removal type. This is one of 126 the UFS device descriptor parameters. The full information 127 about the descriptor could be found at UFS specifications 2.1. 128 129 The file is read only. 130 131What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun 132What: /sys/bus/platform/devices/*.ufs/device_descriptor/support_security_lun 133Date: February 2018 134Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 135Description: This file shows whether the security lun is supported. 136 This is one of the UFS device descriptor parameters. 137 The full information about the descriptor could be found 138 at UFS specifications 2.1. 139 140 The file is read only. 141 142What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency 143What: /sys/bus/platform/devices/*.ufs/device_descriptor/bkops_termination_latency 144Date: February 2018 145Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 146Description: This file shows the background operations termination 147 latency. This is one of the UFS device descriptor parameters. 148 The full information about the descriptor could be found 149 at UFS specifications 2.1. 150 151 The file is read only. 152 153What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level 154What: /sys/bus/platform/devices/*.ufs/device_descriptor/initial_active_icc_level 155Date: February 2018 156Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 157Description: This file shows the initial active ICC level. This is one 158 of the UFS device descriptor parameters. The full information 159 about the descriptor could be found at UFS specifications 2.1. 160 161 The file is read only. 162 163What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version 164What: /sys/bus/platform/devices/*.ufs/device_descriptor/specification_version 165Date: February 2018 166Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 167Description: This file shows the specification version. This is one 168 of the UFS device descriptor parameters. The full information 169 about the descriptor could be found at UFS specifications 2.1. 170 171 The file is read only. 172 173What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date 174What: /sys/bus/platform/devices/*.ufs/device_descriptor/manufacturing_date 175Date: February 2018 176Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 177Description: This file shows the manufacturing date in BCD format. 178 This is one of the UFS device descriptor parameters. 179 The full information about the descriptor could be found 180 at UFS specifications 2.1. 181 182 The file is read only. 183 184What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id 185What: /sys/bus/platform/devices/*.ufs/device_descriptor/manufacturer_id 186Date: February 2018 187Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 188Description: This file shows the manufacturer ID. This is one of the 189 UFS device descriptor parameters. The full information about 190 the descriptor could be found at UFS specifications 2.1. 191 192 The file is read only. 193 194What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability 195What: /sys/bus/platform/devices/*.ufs/device_descriptor/rtt_capability 196Date: February 2018 197Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 198Description: This file shows the maximum number of outstanding RTTs 199 supported by the device. This is one of the UFS device 200 descriptor parameters. The full information about 201 the descriptor could be found at UFS specifications 2.1. 202 203 The file is read only. 204 205What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update 206What: /sys/bus/platform/devices/*.ufs/device_descriptor/rtc_update 207Date: February 2018 208Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 209Description: This file shows the frequency and method of the realtime 210 clock update. This is one of the UFS device descriptor 211 parameters. The full information about the descriptor 212 could be found at UFS specifications 2.1. 213 214 The file is read only. 215 216What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features 217What: /sys/bus/platform/devices/*.ufs/device_descriptor/ufs_features 218Date: February 2018 219Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 220Description: This file shows which features are supported by the device. 221 This is one of the UFS device descriptor parameters. 222 The full information about the descriptor could be 223 found at UFS specifications 2.1. 224 225 The file is read only. 226 227What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout 228What: /sys/bus/platform/devices/*.ufs/device_descriptor/ffu_timeout 229Date: February 2018 230Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 231Description: This file shows the FFU timeout. This is one of the 232 UFS device descriptor parameters. The full information 233 about the descriptor could be found at UFS specifications 2.1. 234 235 The file is read only. 236 237What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth 238What: /sys/bus/platform/devices/*.ufs/device_descriptor/queue_depth 239Date: February 2018 240Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 241Description: This file shows the device queue depth. This is one of the 242 UFS device descriptor parameters. The full information 243 about the descriptor could be found at UFS specifications 2.1. 244 245 The file is read only. 246 247What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version 248What: /sys/bus/platform/devices/*.ufs/device_descriptor/device_version 249Date: February 2018 250Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 251Description: This file shows the device version. This is one of the 252 UFS device descriptor parameters. The full information 253 about the descriptor could be found at UFS specifications 2.1. 254 255 The file is read only. 256 257What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa 258What: /sys/bus/platform/devices/*.ufs/device_descriptor/number_of_secure_wpa 259Date: February 2018 260Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 261Description: This file shows number of secure write protect areas 262 supported by the device. This is one of the UFS device 263 descriptor parameters. The full information about 264 the descriptor could be found at UFS specifications 2.1. 265 266 The file is read only. 267 268What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size 269What: /sys/bus/platform/devices/*.ufs/device_descriptor/psa_max_data_size 270Date: February 2018 271Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 272Description: This file shows the maximum amount of data that may be 273 written during the pre-soldering phase of the PSA flow. 274 This is one of the UFS device descriptor parameters. 275 The full information about the descriptor could be found 276 at UFS specifications 2.1. 277 278 The file is read only. 279 280What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout 281What: /sys/bus/platform/devices/*.ufs/device_descriptor/psa_state_timeout 282Date: February 2018 283Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 284Description: This file shows the command maximum timeout for a change 285 in PSA state. This is one of the UFS device descriptor 286 parameters. The full information about the descriptor could 287 be found at UFS specifications 2.1. 288 289 The file is read only. 290 291 292What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/unipro_version 293What: /sys/bus/platform/devices/*.ufs/interconnect_descriptor/unipro_version 294Date: February 2018 295Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 296Description: This file shows the MIPI UniPro version number in BCD format. 297 This is one of the UFS interconnect descriptor parameters. 298 The full information about the descriptor could be found at 299 UFS specifications 2.1. 300 301 The file is read only. 302 303What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/mphy_version 304What: /sys/bus/platform/devices/*.ufs/interconnect_descriptor/mphy_version 305Date: February 2018 306Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 307Description: This file shows the MIPI M-PHY version number in BCD format. 308 This is one of the UFS interconnect descriptor parameters. 309 The full information about the descriptor could be found at 310 UFS specifications 2.1. 311 312 The file is read only. 313 314 315What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/raw_device_capacity 316What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/raw_device_capacity 317Date: February 2018 318Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 319Description: This file shows the total memory quantity available to 320 the user to configure the device logical units. This is one 321 of the UFS geometry descriptor parameters. The full 322 information about the descriptor could be found at 323 UFS specifications 2.1. 324 325 The file is read only. 326 327What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_luns 328What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/max_number_of_luns 329Date: February 2018 330Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 331Description: This file shows the maximum number of logical units 332 supported by the UFS device. This is one of the UFS 333 geometry descriptor parameters. The full information about 334 the descriptor could be found at UFS specifications 2.1. 335 336 The file is read only. 337 338What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/segment_size 339What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/segment_size 340Date: February 2018 341Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 342Description: This file shows the segment size. This is one of the UFS 343 geometry descriptor parameters. The full information about 344 the descriptor could be found at UFS specifications 2.1. 345 346 The file is read only. 347 348What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/allocation_unit_size 349What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/allocation_unit_size 350Date: February 2018 351Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 352Description: This file shows the allocation unit size. This is one of 353 the UFS geometry descriptor parameters. The full information 354 about the descriptor could be found at UFS specifications 2.1. 355 356 The file is read only. 357 358What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/min_addressable_block_size 359What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/min_addressable_block_size 360Date: February 2018 361Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 362Description: This file shows the minimum addressable block size. This 363 is one of the UFS geometry descriptor parameters. The full 364 information about the descriptor could be found at UFS 365 specifications 2.1. 366 367 The file is read only. 368 369What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_read_block_size 370What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/optimal_read_block_size 371Date: February 2018 372Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 373Description: This file shows the optimal read block size. This is one 374 of the UFS geometry descriptor parameters. The full 375 information about the descriptor could be found at UFS 376 specifications 2.1. 377 378 The file is read only. 379 380What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_write_block_size 381What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/optimal_write_block_size 382Date: February 2018 383Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 384Description: This file shows the optimal write block size. This is one 385 of the UFS geometry descriptor parameters. The full 386 information about the descriptor could be found at UFS 387 specifications 2.1. 388 389 The file is read only. 390 391What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_in_buffer_size 392What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/max_in_buffer_size 393Date: February 2018 394Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 395Description: This file shows the maximum data-in buffer size. This 396 is one of the UFS geometry descriptor parameters. The full 397 information about the descriptor could be found at UFS 398 specifications 2.1. 399 400 The file is read only. 401 402What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_out_buffer_size 403What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/max_out_buffer_size 404Date: February 2018 405Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 406Description: This file shows the maximum data-out buffer size. This 407 is one of the UFS geometry descriptor parameters. The full 408 information about the descriptor could be found at UFS 409 specifications 2.1. 410 411 The file is read only. 412 413What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/rpmb_rw_size 414What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/rpmb_rw_size 415Date: February 2018 416Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 417Description: This file shows the maximum number of RPMB frames allowed 418 in Security Protocol In/Out. This is one of the UFS geometry 419 descriptor parameters. The full information about the 420 descriptor could be found at UFS specifications 2.1. 421 422 The file is read only. 423 424What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/dyn_capacity_resource_policy 425What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/dyn_capacity_resource_policy 426Date: February 2018 427Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 428Description: This file shows the dynamic capacity resource policy. This 429 is one of the UFS geometry descriptor parameters. The full 430 information about the descriptor could be found at 431 UFS specifications 2.1. 432 433 The file is read only. 434 435What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/data_ordering 436What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/data_ordering 437Date: February 2018 438Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 439Description: This file shows support for out-of-order data transfer. 440 This is one of the UFS geometry descriptor parameters. 441 The full information about the descriptor could be found at 442 UFS specifications 2.1. 443 444 The file is read only. 445 446What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_contexts 447What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/max_number_of_contexts 448Date: February 2018 449Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 450Description: This file shows maximum available number of contexts which 451 are supported by the device. This is one of the UFS geometry 452 descriptor parameters. The full information about the 453 descriptor could be found at UFS specifications 2.1. 454 455 The file is read only. 456 457What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_unit_size 458What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/sys_data_tag_unit_size 459Date: February 2018 460Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 461Description: This file shows system data tag unit size. This is one of 462 the UFS geometry descriptor parameters. The full information 463 about the descriptor could be found at UFS specifications 2.1. 464 465 The file is read only. 466 467What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_resource_size 468What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/sys_data_tag_resource_size 469Date: February 2018 470Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 471Description: This file shows maximum storage area size allocated by 472 the device to handle system data by the tagging mechanism. 473 This is one of the UFS geometry descriptor parameters. 474 The full information about the descriptor could be found at 475 UFS specifications 2.1. 476 477 The file is read only. 478 479What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/secure_removal_types 480What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/secure_removal_types 481Date: February 2018 482Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 483Description: This file shows supported secure removal types. This is 484 one of the UFS geometry descriptor parameters. The full 485 information about the descriptor could be found at 486 UFS specifications 2.1. 487 488 The file is read only. 489 490What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/memory_types 491What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/memory_types 492Date: February 2018 493Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 494Description: This file shows supported memory types. This is one of 495 the UFS geometry descriptor parameters. The full 496 information about the descriptor could be found at 497 UFS specifications 2.1. 498 499 The file is read only. 500 501What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_max_alloc_units 502What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/*_memory_max_alloc_units 503Date: February 2018 504Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 505Description: This file shows the maximum number of allocation units for 506 different memory types (system code, non persistent, 507 enhanced type 1-4). This is one of the UFS geometry 508 descriptor parameters. The full information about the 509 descriptor could be found at UFS specifications 2.1. 510 511 The file is read only. 512 513What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_capacity_adjustment_factor 514What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/*_memory_capacity_adjustment_factor 515Date: February 2018 516Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 517Description: This file shows the memory capacity adjustment factor for 518 different memory types (system code, non persistent, 519 enhanced type 1-4). This is one of the UFS geometry 520 descriptor parameters. The full information about the 521 descriptor could be found at UFS specifications 2.1. 522 523 The file is read only. 524 525 526What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/eol_info 527What: /sys/bus/platform/devices/*.ufs/health_descriptor/eol_info 528Date: February 2018 529Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 530Description: This file shows preend of life information. This is one 531 of the UFS health descriptor parameters. The full 532 information about the descriptor could be found at 533 UFS specifications 2.1. 534 535 The file is read only. 536 537What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_a 538What: /sys/bus/platform/devices/*.ufs/health_descriptor/life_time_estimation_a 539Date: February 2018 540Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 541Description: This file shows indication of the device life time 542 (method a). This is one of the UFS health descriptor 543 parameters. The full information about the descriptor 544 could be found at UFS specifications 2.1. 545 546 The file is read only. 547 548What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_b 549What: /sys/bus/platform/devices/*.ufs/health_descriptor/life_time_estimation_b 550Date: February 2018 551Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 552Description: This file shows indication of the device life time 553 (method b). This is one of the UFS health descriptor 554 parameters. The full information about the descriptor 555 could be found at UFS specifications 2.1. 556 557 The file is read only. 558 559 560What: /sys/bus/platform/drivers/ufshcd/*/power_descriptor/active_icc_levels_vcc* 561What: /sys/bus/platform/devices/*.ufs/power_descriptor/active_icc_levels_vcc* 562Date: February 2018 563Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 564Description: This file shows maximum VCC, VCCQ and VCCQ2 value for 565 active ICC levels from 0 to 15. This is one of the UFS 566 power descriptor parameters. The full information about 567 the descriptor could be found at UFS specifications 2.1. 568 569 The file is read only. 570 571 572What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/manufacturer_name 573What: /sys/bus/platform/devices/*.ufs/string_descriptors/manufacturer_name 574Date: February 2018 575Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 576Description: This file contains a device manufacturer name string. 577 The full information about the descriptor could be found at 578 UFS specifications 2.1. 579 580 The file is read only. 581 582What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_name 583What: /sys/bus/platform/devices/*.ufs/string_descriptors/product_name 584Date: February 2018 585Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 586Description: This file contains a product name string. The full information 587 about the descriptor could be found at UFS specifications 2.1. 588 589 The file is read only. 590 591What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/oem_id 592What: /sys/bus/platform/devices/*.ufs/string_descriptors/oem_id 593Date: February 2018 594Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 595Description: This file contains a OEM ID string. The full information 596 about the descriptor could be found at UFS specifications 2.1. 597 598 The file is read only. 599 600What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/serial_number 601What: /sys/bus/platform/devices/*.ufs/string_descriptors/serial_number 602Date: February 2018 603Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 604Description: This file contains a device serial number string. The full 605 information about the descriptor could be found at 606 UFS specifications 2.1. 607 608 The file is read only. 609 610What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_revision 611What: /sys/bus/platform/devices/*.ufs/string_descriptors/product_revision 612Date: February 2018 613Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 614Description: This file contains a product revision string. The full 615 information about the descriptor could be found at 616 UFS specifications 2.1. 617 618 The file is read only. 619 620 621What: /sys/class/scsi_device/*/device/unit_descriptor/boot_lun_id 622Date: February 2018 623Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 624Description: This file shows boot LUN information. This is one of 625 the UFS unit descriptor parameters. The full information 626 about the descriptor could be found at UFS specifications 2.1. 627 628 The file is read only. 629 630What: /sys/class/scsi_device/*/device/unit_descriptor/lun_write_protect 631Date: February 2018 632Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 633Description: This file shows LUN write protection status. This is one of 634 the UFS unit descriptor parameters. The full information 635 about the descriptor could be found at UFS specifications 2.1. 636 637 The file is read only. 638 639What: /sys/class/scsi_device/*/device/unit_descriptor/lun_queue_depth 640Date: February 2018 641Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 642Description: This file shows LUN queue depth. This is one of the UFS 643 unit descriptor parameters. The full information about 644 the descriptor could be found at UFS specifications 2.1. 645 646 The file is read only. 647 648What: /sys/class/scsi_device/*/device/unit_descriptor/psa_sensitive 649Date: February 2018 650Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 651Description: This file shows PSA sensitivity. This is one of the UFS 652 unit descriptor parameters. The full information about 653 the descriptor could be found at UFS specifications 2.1. 654 655 The file is read only. 656 657What: /sys/class/scsi_device/*/device/unit_descriptor/lun_memory_type 658Date: February 2018 659Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 660Description: This file shows LUN memory type. This is one of the UFS 661 unit descriptor parameters. The full information about 662 the descriptor could be found at UFS specifications 2.1. 663 664 The file is read only. 665 666What: /sys/class/scsi_device/*/device/unit_descriptor/data_reliability 667Date: February 2018 668Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 669Description: This file defines the device behavior when a power failure 670 occurs during a write operation. This is one of the UFS 671 unit descriptor parameters. The full information about 672 the descriptor could be found at UFS specifications 2.1. 673 674 The file is read only. 675 676What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_size 677Date: February 2018 678Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 679Description: This file shows the size of addressable logical blocks 680 (calculated as an exponent with base 2). This is one of 681 the UFS unit descriptor parameters. The full information about 682 the descriptor could be found at UFS specifications 2.1. 683 684 The file is read only. 685 686What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_count 687Date: February 2018 688Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 689Description: This file shows total number of addressable logical blocks. 690 This is one of the UFS unit descriptor parameters. The full 691 information about the descriptor could be found at 692 UFS specifications 2.1. 693 694 The file is read only. 695 696What: /sys/class/scsi_device/*/device/unit_descriptor/erase_block_size 697Date: February 2018 698Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 699Description: This file shows the erase block size. This is one of 700 the UFS unit descriptor parameters. The full information 701 about the descriptor could be found at UFS specifications 2.1. 702 703 The file is read only. 704 705What: /sys/class/scsi_device/*/device/unit_descriptor/provisioning_type 706Date: February 2018 707Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 708Description: This file shows the thin provisioning type. This is one of 709 the UFS unit descriptor parameters. The full information 710 about the descriptor could be found at UFS specifications 2.1. 711 712 The file is read only. 713 714What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resource_count 715Date: February 2018 716Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 717Description: This file shows the total physical memory resources. This is 718 one of the UFS unit descriptor parameters. The full information 719 about the descriptor could be found at UFS specifications 2.1. 720 721 The file is read only. 722 723What: /sys/class/scsi_device/*/device/unit_descriptor/context_capabilities 724Date: February 2018 725Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 726Description: This file shows the context capabilities. This is one of 727 the UFS unit descriptor parameters. The full information 728 about the descriptor could be found at UFS specifications 2.1. 729 730 The file is read only. 731 732What: /sys/class/scsi_device/*/device/unit_descriptor/large_unit_granularity 733Date: February 2018 734Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 735Description: This file shows the granularity of the LUN. This is one of 736 the UFS unit descriptor parameters. The full information 737 about the descriptor could be found at UFS specifications 2.1. 738 739 The file is read only. 740 741 742What: /sys/bus/platform/drivers/ufshcd/*/flags/device_init 743What: /sys/bus/platform/devices/*.ufs/flags/device_init 744Date: February 2018 745Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 746Description: This file shows the device init status. The full information 747 about the flag could be found at UFS specifications 2.1. 748 749 The file is read only. 750 751What: /sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe 752What: /sys/bus/platform/devices/*.ufs/flags/permanent_wpe 753Date: February 2018 754Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 755Description: This file shows whether permanent write protection is enabled. 756 The full information about the flag could be found at 757 UFS specifications 2.1. 758 759 The file is read only. 760 761What: /sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe 762What: /sys/bus/platform/devices/*.ufs/flags/power_on_wpe 763Date: February 2018 764Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 765Description: This file shows whether write protection is enabled on all 766 logical units configured as power on write protected. The 767 full information about the flag could be found at 768 UFS specifications 2.1. 769 770 The file is read only. 771 772What: /sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable 773What: /sys/bus/platform/devices/*.ufs/flags/bkops_enable 774Date: February 2018 775Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 776Description: This file shows whether the device background operations are 777 enabled. The full information about the flag could be 778 found at UFS specifications 2.1. 779 780 The file is read only. 781 782What: /sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable 783What: /sys/bus/platform/devices/*.ufs/flags/life_span_mode_enable 784Date: February 2018 785Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 786Description: This file shows whether the device life span mode is enabled. 787 The full information about the flag could be found at 788 UFS specifications 2.1. 789 790 The file is read only. 791 792What: /sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal 793What: /sys/bus/platform/devices/*.ufs/flags/phy_resource_removal 794Date: February 2018 795Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 796Description: This file shows whether physical resource removal is enable. 797 The full information about the flag could be found at 798 UFS specifications 2.1. 799 800 The file is read only. 801 802What: /sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc 803What: /sys/bus/platform/devices/*.ufs/flags/busy_rtc 804Date: February 2018 805Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 806Description: This file shows whether the device is executing internal 807 operation related to real time clock. The full information 808 about the flag could be found at UFS specifications 2.1. 809 810 The file is read only. 811 812What: /sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update 813What: /sys/bus/platform/devices/*.ufs/flags/disable_fw_update 814Date: February 2018 815Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 816Description: This file shows whether the device FW update is permanently 817 disabled. The full information about the flag could be found 818 at UFS specifications 2.1. 819 820 The file is read only. 821 822 823What: /sys/bus/platform/drivers/ufshcd/*/attributes/boot_lun_enabled 824What: /sys/bus/platform/devices/*.ufs/attributes/boot_lun_enabled 825Date: February 2018 826Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 827Description: This file provides the boot lun enabled UFS device attribute. 828 The full information about the attribute could be found at 829 UFS specifications 2.1. 830 831 The file is read only. 832 833What: /sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode 834What: /sys/bus/platform/devices/*.ufs/attributes/current_power_mode 835Date: February 2018 836Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 837Description: This file provides the current power mode UFS device attribute. 838 The full information about the attribute could be found at 839 UFS specifications 2.1. 840 841 The file is read only. 842 843What: /sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level 844What: /sys/bus/platform/devices/*.ufs/attributes/active_icc_level 845Date: February 2018 846Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 847Description: This file provides the active icc level UFS device attribute. 848 The full information about the attribute could be found at 849 UFS specifications 2.1. 850 851 The file is read only. 852 853What: /sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled 854What: /sys/bus/platform/devices/*.ufs/attributes/ooo_data_enabled 855Date: February 2018 856Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 857Description: This file provides the out of order data transfer enabled UFS 858 device attribute. The full information about the attribute 859 could be found at UFS specifications 2.1. 860 861 The file is read only. 862 863What: /sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status 864What: /sys/bus/platform/devices/*.ufs/attributes/bkops_status 865Date: February 2018 866Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 867Description: This file provides the background operations status UFS device 868 attribute. The full information about the attribute could 869 be found at UFS specifications 2.1. 870 871 The file is read only. 872 873What: /sys/bus/platform/drivers/ufshcd/*/attributes/purge_status 874What: /sys/bus/platform/devices/*.ufs/attributes/purge_status 875Date: February 2018 876Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 877Description: This file provides the purge operation status UFS device 878 attribute. The full information about the attribute could 879 be found at UFS specifications 2.1. 880 881 The file is read only. 882 883What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size 884What: /sys/bus/platform/devices/*.ufs/attributes/max_data_in_size 885Date: February 2018 886Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 887Description: This file shows the maximum data size in a DATA IN 888 UPIU. The full information about the attribute could 889 be found at UFS specifications 2.1. 890 891 The file is read only. 892 893What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size 894What: /sys/bus/platform/devices/*.ufs/attributes/max_data_out_size 895Date: February 2018 896Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 897Description: This file shows the maximum number of bytes that can be 898 requested with a READY TO TRANSFER UPIU. The full information 899 about the attribute could be found at UFS specifications 2.1. 900 901 The file is read only. 902 903What: /sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency 904What: /sys/bus/platform/devices/*.ufs/attributes/reference_clock_frequency 905Date: February 2018 906Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 907Description: This file provides the reference clock frequency UFS device 908 attribute. The full information about the attribute could 909 be found at UFS specifications 2.1. 910 911 The file is read only. 912 913What: /sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock 914What: /sys/bus/platform/devices/*.ufs/attributes/configuration_descriptor_lock 915Date: February 2018 916Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 917Description: This file shows whether the configuration descriptor is locked. 918 The full information about the attribute could be found at 919 UFS specifications 2.1. The file is read only. 920 921What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_number_of_rtt 922What: /sys/bus/platform/devices/*.ufs/attributes/max_number_of_rtt 923Date: May 2024 924Contact: Avri Altman <avri.altman@wdc.com> 925Description: This file provides the maximum current number of 926 outstanding RTTs in device that is allowed. bMaxNumOfRTT is a 927 read-write persistent attribute and is equal to two after device 928 manufacturing. It shall not be set to a value greater than 929 bDeviceRTTCap value, and it may be set only when the hw queues are 930 empty. 931 932 The file is read write. 933 934What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control 935What: /sys/bus/platform/devices/*.ufs/attributes/exception_event_control 936Date: February 2018 937Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 938Description: This file provides the exception event control UFS device 939 attribute. The full information about the attribute could 940 be found at UFS specifications 2.1. 941 942 The file is read only. 943 944What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status 945What: /sys/bus/platform/devices/*.ufs/attributes/exception_event_status 946Date: February 2018 947Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 948Description: This file provides the exception event status UFS device 949 attribute. The full information about the attribute could 950 be found at UFS specifications 2.1. 951 952 The file is read only. 953 954What: /sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status 955What: /sys/bus/platform/devices/*.ufs/attributes/ffu_status 956Date: February 2018 957Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 958Description: This file provides the ffu status UFS device attribute. 959 The full information about the attribute could be found at 960 UFS specifications 2.1. 961 962 The file is read only. 963 964What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_state 965What: /sys/bus/platform/devices/*.ufs/attributes/psa_state 966Date: February 2018 967Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 968Description: This file show the PSA feature status. The full information 969 about the attribute could be found at UFS specifications 2.1. 970 971 The file is read only. 972 973What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size 974What: /sys/bus/platform/devices/*.ufs/attributes/psa_data_size 975Date: February 2018 976Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 977Description: This file shows the amount of data that the host plans to 978 load to all logical units in pre-soldering state. 979 The full information about the attribute could be found at 980 UFS specifications 2.1. 981 982 The file is read only. 983 984 985What: /sys/class/scsi_device/*/device/dyn_cap_needed 986Date: February 2018 987Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> 988Description: This file shows the amount of physical memory needed 989 to be removed from the physical memory resources pool of 990 the particular logical unit. The full information about 991 the attribute could be found at UFS specifications 2.1. 992 993 The file is read only. 994 995 996What: /sys/bus/platform/drivers/ufshcd/*/rpm_lvl 997What: /sys/bus/platform/devices/*.ufs/rpm_lvl 998Date: September 2014 999Contact: Can Guo <quic_cang@quicinc.com> 1000Description: This entry could be used to set or show the UFS device 1001 runtime power management level. The current driver 1002 implementation supports 7 levels with next target states: 1003 1004 == ==================================================== 1005 0 UFS device will stay active, UIC link will 1006 stay active 1007 1 UFS device will stay active, UIC link will 1008 hibernate 1009 2 UFS device will be moved to sleep, UIC link will 1010 stay active 1011 3 UFS device will be moved to sleep, UIC link will 1012 hibernate 1013 4 UFS device will be powered off, UIC link will 1014 hibernate 1015 5 UFS device will be powered off, UIC link will 1016 be powered off 1017 6 UFS device will be moved to deep sleep, UIC link 1018 will be powered off. Note, deep sleep might not be 1019 supported in which case this value will not be 1020 accepted 1021 == ==================================================== 1022 1023What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state 1024What: /sys/bus/platform/devices/*.ufs/rpm_target_dev_state 1025Date: February 2018 1026Contact: Can Guo <quic_cang@quicinc.com> 1027Description: This entry shows the target power mode of an UFS device 1028 for the chosen runtime power management level. 1029 1030 The file is read only. 1031 1032What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state 1033What: /sys/bus/platform/devices/*.ufs/rpm_target_link_state 1034Date: February 2018 1035Contact: Can Guo <quic_cang@quicinc.com> 1036Description: This entry shows the target state of an UFS UIC link 1037 for the chosen runtime power management level. 1038 1039 The file is read only. 1040 1041What: /sys/bus/platform/drivers/ufshcd/*/spm_lvl 1042What: /sys/bus/platform/devices/*.ufs/spm_lvl 1043Date: September 2014 1044Contact: Can Guo <quic_cang@quicinc.com> 1045Description: This entry could be used to set or show the UFS device 1046 system power management level. The current driver 1047 implementation supports 7 levels with next target states: 1048 1049 == ==================================================== 1050 0 UFS device will stay active, UIC link will 1051 stay active 1052 1 UFS device will stay active, UIC link will 1053 hibernate 1054 2 UFS device will be moved to sleep, UIC link will 1055 stay active 1056 3 UFS device will be moved to sleep, UIC link will 1057 hibernate 1058 4 UFS device will be powered off, UIC link will 1059 hibernate 1060 5 UFS device will be powered off, UIC link will 1061 be powered off 1062 6 UFS device will be moved to deep sleep, UIC link 1063 will be powered off. Note, deep sleep might not be 1064 supported in which case this value will not be 1065 accepted 1066 == ==================================================== 1067 1068What: /sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state 1069What: /sys/bus/platform/devices/*.ufs/spm_target_dev_state 1070Date: February 2018 1071Contact: Can Guo <quic_cang@quicinc.com> 1072Description: This entry shows the target power mode of an UFS device 1073 for the chosen system power management level. 1074 1075 The file is read only. 1076 1077What: /sys/bus/platform/drivers/ufshcd/*/spm_target_link_state 1078What: /sys/bus/platform/devices/*.ufs/spm_target_link_state 1079Date: February 2018 1080Contact: Can Guo <quic_cang@quicinc.com> 1081Description: This entry shows the target state of an UFS UIC link 1082 for the chosen system power management level. 1083 1084 The file is read only. 1085 1086What: /sys/bus/platform/drivers/ufshcd/*/monitor/monitor_enable 1087What: /sys/bus/platform/devices/*.ufs/monitor/monitor_enable 1088Date: January 2021 1089Contact: Can Guo <quic_cang@quicinc.com> 1090Description: This file shows the status of performance monitor enablement 1091 and it can be used to start/stop the monitor. When the monitor 1092 is stopped, the performance data collected is also cleared. 1093 1094What: /sys/bus/platform/drivers/ufshcd/*/monitor/monitor_chunk_size 1095What: /sys/bus/platform/devices/*.ufs/monitor/monitor_chunk_size 1096Date: January 2021 1097Contact: Can Guo <quic_cang@quicinc.com> 1098Description: This file tells the monitor to focus on requests transferring 1099 data of specific chunk size (in Bytes). 0 means any chunk size. 1100 It can only be changed when monitor is disabled. 1101 1102What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_total_sectors 1103What: /sys/bus/platform/devices/*.ufs/monitor/read_total_sectors 1104Date: January 2021 1105Contact: Can Guo <quic_cang@quicinc.com> 1106Description: This file shows how many sectors (in 512 Bytes) have been 1107 sent from device to host after monitor gets started. 1108 1109 The file is read only. 1110 1111What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_total_busy 1112What: /sys/bus/platform/devices/*.ufs/monitor/read_total_busy 1113Date: January 2021 1114Contact: Can Guo <quic_cang@quicinc.com> 1115Description: This file shows how long (in micro seconds) has been spent 1116 sending data from device to host after monitor gets started. 1117 1118 The file is read only. 1119 1120What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_nr_requests 1121What: /sys/bus/platform/devices/*.ufs/monitor/read_nr_requests 1122Date: January 2021 1123Contact: Can Guo <quic_cang@quicinc.com> 1124Description: This file shows how many read requests have been sent after 1125 monitor gets started. 1126 1127 The file is read only. 1128 1129What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_max 1130What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_max 1131Date: January 2021 1132Contact: Can Guo <quic_cang@quicinc.com> 1133Description: This file shows the maximum latency (in micro seconds) of 1134 read requests after monitor gets started. 1135 1136 The file is read only. 1137 1138What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_min 1139What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_min 1140Date: January 2021 1141Contact: Can Guo <quic_cang@quicinc.com> 1142Description: This file shows the minimum latency (in micro seconds) of 1143 read requests after monitor gets started. 1144 1145 The file is read only. 1146 1147What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_avg 1148What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_avg 1149Date: January 2021 1150Contact: Can Guo <quic_cang@quicinc.com> 1151Description: This file shows the average latency (in micro seconds) of 1152 read requests after monitor gets started. 1153 1154 The file is read only. 1155 1156What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_sum 1157What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_sum 1158Date: January 2021 1159Contact: Can Guo <quic_cang@quicinc.com> 1160Description: This file shows the total latency (in micro seconds) of 1161 read requests sent after monitor gets started. 1162 1163 The file is read only. 1164 1165What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_total_sectors 1166What: /sys/bus/platform/devices/*.ufs/monitor/write_total_sectors 1167Date: January 2021 1168Contact: Can Guo <quic_cang@quicinc.com> 1169Description: This file shows how many sectors (in 512 Bytes) have been sent 1170 from host to device after monitor gets started. 1171 1172 The file is read only. 1173 1174What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_total_busy 1175What: /sys/bus/platform/devices/*.ufs/monitor/write_total_busy 1176Date: January 2021 1177Contact: Can Guo <quic_cang@quicinc.com> 1178Description: This file shows how long (in micro seconds) has been spent 1179 sending data from host to device after monitor gets started. 1180 1181 The file is read only. 1182 1183What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_nr_requests 1184What: /sys/bus/platform/devices/*.ufs/monitor/write_nr_requests 1185Date: January 2021 1186Contact: Can Guo <quic_cang@quicinc.com> 1187Description: This file shows how many write requests have been sent after 1188 monitor gets started. 1189 1190 The file is read only. 1191 1192What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_max 1193What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_max 1194Date: January 2021 1195Contact: Can Guo <quic_cang@quicinc.com> 1196Description: This file shows the maximum latency (in micro seconds) of write 1197 requests after monitor gets started. 1198 1199 The file is read only. 1200 1201What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_min 1202What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_min 1203Date: January 2021 1204Contact: Can Guo <quic_cang@quicinc.com> 1205Description: This file shows the minimum latency (in micro seconds) of write 1206 requests after monitor gets started. 1207 1208 The file is read only. 1209 1210What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_avg 1211What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_avg 1212Date: January 2021 1213Contact: Can Guo <quic_cang@quicinc.com> 1214Description: This file shows the average latency (in micro seconds) of write 1215 requests after monitor gets started. 1216 1217 The file is read only. 1218 1219What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum 1220What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_sum 1221Date: January 2021 1222Contact: Can Guo <quic_cang@quicinc.com> 1223Description: This file shows the total latency (in micro seconds) of write 1224 requests after monitor gets started. 1225 1226 The file is read only. 1227 1228What: /sys/bus/platform/drivers/ufshcd/*/power_info/lane 1229What: /sys/bus/platform/devices/*.ufs/power_info/lane 1230Date: September 2023 1231Contact: Can Guo <quic_cang@quicinc.com> 1232Description: This file shows how many lanes are enabled on the UFS link, 1233 i.e., an output 2 means UFS link is operating with 2 lanes. 1234 1235 The file is read only. 1236 1237What: /sys/bus/platform/drivers/ufshcd/*/power_info/mode 1238What: /sys/bus/platform/devices/*.ufs/power_info/mode 1239Date: September 2023 1240Contact: Can Guo <quic_cang@quicinc.com> 1241Description: This file shows the PA power mode of UFS. 1242 1243 The file is read only. 1244 1245What: /sys/bus/platform/drivers/ufshcd/*/power_info/rate 1246What: /sys/bus/platform/devices/*.ufs/power_info/rate 1247Date: September 2023 1248Contact: Can Guo <quic_cang@quicinc.com> 1249Description: This file shows the speed rate of UFS link. 1250 1251 The file is read only. 1252 1253What: /sys/bus/platform/drivers/ufshcd/*/power_info/gear 1254What: /sys/bus/platform/devices/*.ufs/power_info/gear 1255Date: September 2023 1256Contact: Can Guo <quic_cang@quicinc.com> 1257Description: This file shows the gear of UFS link. 1258 1259 The file is read only. 1260 1261What: /sys/bus/platform/drivers/ufshcd/*/power_info/dev_pm 1262What: /sys/bus/platform/devices/*.ufs/power_info/dev_pm 1263Date: September 2023 1264Contact: Can Guo <quic_cang@quicinc.com> 1265Description: This file shows the UFS device power mode. 1266 1267 The file is read only. 1268 1269What: /sys/bus/platform/drivers/ufshcd/*/power_info/link_state 1270What: /sys/bus/platform/devices/*.ufs/power_info/link_state 1271Date: September 2023 1272Contact: Can Guo <quic_cang@quicinc.com> 1273Description: This file shows the state of UFS link. 1274 1275 The file is read only. 1276 1277What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en 1278What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_presv_us_en 1279Date: June 2020 1280Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1281Description: This entry shows if preserve user-space was configured 1282 1283 The file is read only. 1284 1285What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units 1286What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_shared_alloc_units 1287Date: June 2020 1288Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1289Description: This entry shows the shared allocated units of WB buffer 1290 1291 The file is read only. 1292 1293What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type 1294What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_type 1295Date: June 2020 1296Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1297Description: This entry shows the configured WB type. 1298 0x1 for shared buffer mode. 0x0 for dedicated buffer mode. 1299 1300 The file is read only. 1301 1302What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj 1303What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_buff_cap_adj 1304Date: June 2020 1305Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1306Description: This entry shows the total user-space decrease in shared 1307 buffer mode. 1308 The value of this parameter is 3 for TLC NAND when SLC mode 1309 is used as WriteBooster Buffer. 2 for MLC NAND. 1310 1311 The file is read only. 1312 1313What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units 1314What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_alloc_units 1315Date: June 2020 1316Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1317Description: This entry shows the Maximum total WriteBooster Buffer size 1318 which is supported by the entire device. 1319 1320 The file is read only. 1321 1322What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns 1323What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_wb_luns 1324Date: June 2020 1325Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1326Description: This entry shows the maximum number of luns that can support 1327 WriteBooster. 1328 1329 The file is read only. 1330 1331What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type 1332What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_red_type 1333Date: June 2020 1334Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1335Description: The supportability of user space reduction mode 1336 and preserve user space mode. 1337 00h: WriteBooster Buffer can be configured only in 1338 user space reduction type. 1339 01h: WriteBooster Buffer can be configured only in 1340 preserve user space type. 1341 02h: Device can be configured in either user space 1342 reduction type or preserve user space type. 1343 1344 The file is read only. 1345 1346What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type 1347What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_wb_type 1348Date: June 2020 1349Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1350Description: The supportability of WriteBooster Buffer type. 1351 1352 === ========================================================== 1353 00h LU based WriteBooster Buffer configuration 1354 01h Single shared WriteBooster Buffer configuration 1355 02h Supporting both LU based WriteBooster. 1356 Buffer and Single shared WriteBooster Buffer configuration 1357 === ========================================================== 1358 1359 The file is read only. 1360 1361What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_enable 1362What: /sys/bus/platform/devices/*.ufs/flags/wb_enable 1363Date: June 2020 1364Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1365Description: This entry shows the status of WriteBooster. 1366 1367 == ============================ 1368 0 WriteBooster is not enabled. 1369 1 WriteBooster is enabled 1370 == ============================ 1371 1372 The file is read only. 1373 1374What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en 1375What: /sys/bus/platform/devices/*.ufs/flags/wb_flush_en 1376Date: June 2020 1377Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1378Description: This entry shows if flush is enabled. 1379 1380 == ================================= 1381 0 Flush operation is not performed. 1382 1 Flush operation is performed. 1383 == ================================= 1384 1385 The file is read only. 1386 1387What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8 1388What: /sys/bus/platform/devices/*.ufs/flags/wb_flush_during_h8 1389Date: June 2020 1390Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1391Description: Flush WriteBooster Buffer during hibernate state. 1392 1393 == ================================================= 1394 0 Device is not allowed to flush the 1395 WriteBooster Buffer during link hibernate state. 1396 1 Device is allowed to flush the 1397 WriteBooster Buffer during link hibernate state. 1398 == ================================================= 1399 1400 The file is read only. 1401 1402What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf 1403What: /sys/bus/platform/devices/*.ufs/attributes/wb_avail_buf 1404Date: June 2020 1405Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1406Description: This entry shows the amount of unused WriteBooster buffer 1407 available. 1408 1409 The file is read only. 1410 1411What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf 1412What: /sys/bus/platform/devices/*.ufs/attributes/wb_cur_buf 1413Date: June 2020 1414Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1415Description: This entry shows the amount of unused current buffer. 1416 1417 The file is read only. 1418 1419What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status 1420What: /sys/bus/platform/devices/*.ufs/attributes/wb_flush_status 1421Date: June 2020 1422Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1423Description: This entry shows the flush operation status. 1424 1425 1426 === ====================================== 1427 00h idle 1428 01h Flush operation in progress 1429 02h Flush operation stopped prematurely. 1430 03h Flush operation completed successfully 1431 04h Flush operation general failure 1432 === ====================================== 1433 1434 The file is read only. 1435 1436What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est 1437What: /sys/bus/platform/devices/*.ufs/attributes/wb_life_time_est 1438Date: June 2020 1439Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1440Description: This entry shows an indication of the WriteBooster Buffer 1441 lifetime based on the amount of performed program/erase cycles 1442 1443 === ============================================= 1444 01h 0% - 10% WriteBooster Buffer life time used 1445 ... 1446 0Ah 90% - 100% WriteBooster Buffer life time used 1447 === ============================================= 1448 1449 The file is read only. 1450 1451What: /sys/class/scsi_device/*/device/unit_descriptor/wb_buf_alloc_units 1452Date: June 2020 1453Contact: Asutosh Das <quic_asutoshd@quicinc.com> 1454Description: This entry shows the configured size of WriteBooster buffer. 1455 0400h corresponds to 4GB. 1456 1457 The file is read only. 1458 1459What: /sys/bus/platform/drivers/ufshcd/*/wb_on 1460What: /sys/bus/platform/devices/*.ufs/wb_on 1461Date: January 2021 1462Contact: Bean Huo <beanhuo@micron.com> 1463Description: This node is used to set or display whether UFS WriteBooster is 1464 enabled. Echo 0 to this file to disable UFS WriteBooster or 1 to 1465 enable it. The WriteBooster is enabled after power-on/reset, 1466 however, it will be disabled/enable while CLK scaling down/up 1467 (if the platform supports UFSHCD_CAP_CLK_SCALING). For a 1468 platform that doesn't support UFSHCD_CAP_CLK_SCALING, we can 1469 disable/enable WriteBooster through this sysfs node. 1470 1471What: /sys/bus/platform/drivers/ufshcd/*/enable_wb_buf_flush 1472What: /sys/bus/platform/devices/*.ufs/enable_wb_buf_flush 1473Date: July 2022 1474Contact: Jinyoung Choi <j-young.choi@samsung.com> 1475Description: This entry shows the status of WriteBooster buffer flushing 1476 and it can be used to enable or disable the flushing. 1477 If flushing is enabled, the device executes the flush 1478 operation when the command queue is empty. 1479 1480What: /sys/bus/platform/drivers/ufshcd/*/wb_flush_threshold 1481What: /sys/bus/platform/devices/*.ufs/wb_flush_threshold 1482Date: June 2023 1483Contact: Lu Hongfei <luhongfei@vivo.com> 1484Description: 1485 wb_flush_threshold represents the threshold for flushing WriteBooster buffer, 1486 whose value expressed in unit of 10% granularity, such as '1' representing 10%, 1487 '2' representing 20%, and so on. 1488 If avail_wb_buff < wb_flush_threshold, it indicates that WriteBooster buffer needs to 1489 be flushed, otherwise it is not necessary. 1490 1491Contact: Daniil Lunev <dlunev@chromium.org> 1492What: /sys/bus/platform/drivers/ufshcd/*/capabilities/ 1493What: /sys/bus/platform/devices/*.ufs/capabilities/ 1494Date: August 2022 1495Description: The group represents the effective capabilities of the 1496 host-device pair. i.e. the capabilities which are enabled in the 1497 driver for the specific host controller, supported by the host 1498 controller and are supported and/or have compatible 1499 configuration on the device side. 1500 1501Contact: Daniil Lunev <dlunev@chromium.org> 1502What: /sys/bus/platform/drivers/ufshcd/*/capabilities/clock_scaling 1503What: /sys/bus/platform/devices/*.ufs/capabilities/clock_scaling 1504Date: August 2022 1505Contact: Daniil Lunev <dlunev@chromium.org> 1506Description: Indicates status of clock scaling. 1507 1508 == ============================ 1509 0 Clock scaling is not supported. 1510 1 Clock scaling is supported. 1511 == ============================ 1512 1513 The file is read only. 1514 1515What: /sys/bus/platform/drivers/ufshcd/*/capabilities/write_booster 1516What: /sys/bus/platform/devices/*.ufs/capabilities/write_booster 1517Date: August 2022 1518Contact: Daniil Lunev <dlunev@chromium.org> 1519Description: Indicates status of Write Booster. 1520 1521 == ============================ 1522 0 Write Booster can not be enabled. 1523 1 Write Booster can be enabled. 1524 == ============================ 1525 1526 The file is read only. 1527 1528What: /sys/bus/platform/drivers/ufshcd/*/rtc_update_ms 1529What: /sys/bus/platform/devices/*.ufs/rtc_update_ms 1530Date: November 2023 1531Contact: Bean Huo <beanhuo@micron.com> 1532Description: 1533 rtc_update_ms indicates how often the host should synchronize or update the 1534 UFS RTC. If set to 0, this will disable UFS RTC periodic update. 1535 1536What: /sys/devices/platform/.../ufshci_capabilities/version 1537Date: August 2024 1538Contact: Avri Altman <avri.altman@wdc.com> 1539Description: 1540 Host Capabilities register group: UFS version register. 1541 Symbol - VER. This file shows the UFSHCD version. 1542 Example: Version 3.12 would be represented as 0000_0312h. 1543 The file is read only. 1544 1545What: /sys/devices/platform/.../ufshci_capabilities/product_id 1546Date: August 2024 1547Contact: Avri Altman <avri.altman@wdc.com> 1548Description: 1549 Host Capabilities register group: product ID register. 1550 Symbol - HCPID. This file shows the UFSHCD product id. 1551 The content of this register is vendor specific. 1552 The file is read only. 1553 1554What: /sys/devices/platform/.../ufshci_capabilities/man_id 1555Date: August 2024 1556Contact: Avri Altman <avri.altman@wdc.com> 1557Description: 1558 Host Capabilities register group: manufacturer ID register. 1559 Symbol - HCMID. This file shows the UFSHCD manufacturer id. 1560 The Manufacturer ID is defined by JEDEC in JEDEC-JEP106. 1561 The file is read only. 1562 1563What: /sys/bus/platform/drivers/ufshcd/*/critical_health 1564What: /sys/bus/platform/devices/*.ufs/critical_health 1565Date: February 2025 1566Contact: Avri Altman <avri.altman@wdc.com> 1567Description: Report the number of times a critical health event has been 1568 reported by a UFS device. Further insight into the specific 1569 issue can be gained by reading one of: bPreEOLInfo, 1570 bDeviceLifeTimeEstA, bDeviceLifeTimeEstB, 1571 bWriteBoosterBufferLifeTimeEst, and bRPMBLifeTimeEst. 1572 1573 The file is read only. 1574 1575What: /sys/bus/platform/drivers/ufshcd/*/clkscale_enable 1576What: /sys/bus/platform/devices/*.ufs/clkscale_enable 1577Date: January 2025 1578Contact: Ziqi Chen <quic_ziqichen@quicinc.com> 1579Description: 1580 This attribute shows whether the UFS clock scaling is enabled or not. 1581 And it can be used to enable/disable the clock scaling by writing 1582 1 or 0 to this attribute. 1583 1584 The attribute is read/write. 1585 1586What: /sys/bus/platform/drivers/ufshcd/*/clkgate_enable 1587What: /sys/bus/platform/devices/*.ufs/clkgate_enable 1588Date: January 2025 1589Contact: Ziqi Chen <quic_ziqichen@quicinc.com> 1590Description: 1591 This attribute shows whether the UFS clock gating is enabled or not. 1592 And it can be used to enable/disable the clock gating by writing 1593 1 or 0 to this attribute. 1594 1595 The attribute is read/write. 1596 1597What: /sys/bus/platform/drivers/ufshcd/*/clkgate_delay_ms 1598What: /sys/bus/platform/devices/*.ufs/clkgate_delay_ms 1599Date: January 2025 1600Contact: Ziqi Chen <quic_ziqichen@quicinc.com> 1601Description: 1602 This attribute shows and sets the number of milliseconds of idle time 1603 before the UFS driver starts to perform clock gating. This can 1604 prevent the UFS from frequently performing clock gating/ungating. 1605 1606 The attribute is read/write. 1607 1608What: /sys/bus/platform/drivers/ufshcd/*/device_lvl_exception_count 1609What: /sys/bus/platform/devices/*.ufs/device_lvl_exception_count 1610Date: March 2025 1611Contact: Bao D. Nguyen <quic_nguyenb@quicinc.com> 1612Description: 1613 This attribute is applicable to ufs devices compliant to the 1614 JEDEC specifications version 4.1 or later. The 1615 device_lvl_exception_count is a counter indicating the number of 1616 times the device level exceptions have occurred since the last 1617 time this variable is reset. Writing a 0 value to this 1618 attribute will reset the device_lvl_exception_count. If the 1619 device_lvl_exception_count reads a positive value, the user 1620 application should read the device_lvl_exception_id attribute to 1621 know more information about the exception. 1622 1623 The attribute is read/write. 1624 1625What: /sys/bus/platform/drivers/ufshcd/*/device_lvl_exception_id 1626What: /sys/bus/platform/devices/*.ufs/device_lvl_exception_id 1627Date: March 2025 1628Contact: Bao D. Nguyen <quic_nguyenb@quicinc.com> 1629Description: 1630 Reading the device_lvl_exception_id returns the 1631 qDeviceLevelExceptionID attribute of the ufs device JEDEC 1632 specification version 4.1. The definition of the 1633 qDeviceLevelExceptionID is the ufs device vendor specific 1634 implementation. Refer to the device manufacturer datasheet for 1635 more information on the meaning of the qDeviceLevelExceptionID 1636 attribute value. 1637 1638 The attribute is read only. 1639 1640What: /sys/bus/platform/drivers/ufshcd/*/wb_resize_enable 1641What: /sys/bus/platform/devices/*.ufs/wb_resize_enable 1642Date: April 2025 1643Contact: Huan Tang <tanghuan@vivo.com> 1644Description: 1645 The host can enable the WriteBooster buffer resize by setting this 1646 attribute. 1647 1648 ======== ====================================== 1649 idle There is no resize operation 1650 decrease Decrease WriteBooster buffer size 1651 increase Increase WriteBooster buffer size 1652 ======== ====================================== 1653 1654 The file is write only. 1655 1656What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_resize_hint 1657What: /sys/bus/platform/devices/*.ufs/attributes/wb_resize_hint 1658Date: April 2025 1659Contact: Huan Tang <tanghuan@vivo.com> 1660Description: 1661 wb_resize_hint indicates hint information about which type of resize 1662 for WriteBooster buffer is recommended by the device. 1663 1664 ========= ====================================== 1665 keep Recommend keep the buffer size 1666 decrease Recommend to decrease the buffer size 1667 increase Recommend to increase the buffer size 1668 ========= ====================================== 1669 1670 The file is read only. 1671 1672What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_resize_status 1673What: /sys/bus/platform/devices/*.ufs/attributes/wb_resize_status 1674Date: April 2025 1675Contact: Huan Tang <tanghuan@vivo.com> 1676Description: 1677 The host can check the resize operation status of the WriteBooster 1678 buffer by reading this attribute. 1679 1680 ================ ======================================== 1681 idle Resize operation is not issued 1682 in_progress Resize operation in progress 1683 complete_success Resize operation completed successfully 1684 general_failure Resize operation general failure 1685 ================ ======================================== 1686 1687 The file is read only. 1688 1689What: /sys/bus/platform/drivers/ufshcd/*/hid/analysis_trigger 1690What: /sys/bus/platform/devices/*.ufs/hid/analysis_trigger 1691Date: May 2025 1692Contact: Huan Tang <tanghuan@vivo.com> 1693Description: 1694 The host can enable or disable HID analysis operation. 1695 1696 ======= ========================================= 1697 disable disable HID analysis operation 1698 enable enable HID analysis operation 1699 ======= ========================================= 1700 1701 The file is write only. 1702 1703What: /sys/bus/platform/drivers/ufshcd/*/hid/defrag_trigger 1704What: /sys/bus/platform/devices/*.ufs/hid/defrag_trigger 1705Date: May 2025 1706Contact: Huan Tang <tanghuan@vivo.com> 1707Description: 1708 The host can enable or disable HID defragmentation operation. 1709 1710 ======= ========================================= 1711 disable disable HID defragmentation operation 1712 enable enable HID defragmentation operation 1713 ======= ========================================= 1714 1715 The attribute is write only. 1716 1717What: /sys/bus/platform/drivers/ufshcd/*/hid/fragmented_size 1718What: /sys/bus/platform/devices/*.ufs/hid/fragmented_size 1719Date: May 2025 1720Contact: Huan Tang <tanghuan@vivo.com> 1721Description: 1722 The total fragmented size in the device is reported through 1723 this attribute. 1724 1725 The attribute is read only. 1726 1727What: /sys/bus/platform/drivers/ufshcd/*/hid/defrag_size 1728What: /sys/bus/platform/devices/*.ufs/hid/defrag_size 1729Date: May 2025 1730Contact: Huan Tang <tanghuan@vivo.com> 1731Description: 1732 The host sets the size to be defragmented by an HID 1733 defragmentation operation. 1734 1735 The attribute is read/write. 1736 1737What: /sys/bus/platform/drivers/ufshcd/*/hid/progress_ratio 1738What: /sys/bus/platform/devices/*.ufs/hid/progress_ratio 1739Date: May 2025 1740Contact: Huan Tang <tanghuan@vivo.com> 1741Description: 1742 Defragmentation progress is reported by this attribute, 1743 indicates the ratio of the completed defragmentation size 1744 over the requested defragmentation size. 1745 1746 ==== ============================================ 1747 1 1% 1748 ... 1749 100 100% 1750 ==== ============================================ 1751 1752 The attribute is read only. 1753 1754What: /sys/bus/platform/drivers/ufshcd/*/hid/state 1755What: /sys/bus/platform/devices/*.ufs/hid/state 1756Date: May 2025 1757Contact: Huan Tang <tanghuan@vivo.com> 1758Description: 1759 The HID state is reported by this attribute. 1760 1761 ==================== =========================== 1762 idle Idle (analysis required) 1763 analysis_in_progress Analysis in progress 1764 defrag_required Defrag required 1765 defrag_in_progress Defrag in progress 1766 defrag_completed Defrag completed 1767 defrag_not_required Defrag is not required 1768 ==================== =========================== 1769 1770 The attribute is read only.
~/
Read-only file preview.