debugfs-iio-ad9467

 1What:		/sys/kernel/debug/iio/iio:deviceX/calibration_table_dump
 2KernelVersion:	6.11
 3Contact:	linux-iio@vger.kernel.org
 4Description:
 5		This dumps the calibration table that was filled during the
 6		digital interface tuning process.
 7
 8What:		/sys/kernel/debug/iio/iio:deviceX/in_voltage_test_mode_available
 9KernelVersion:	6.11
10Contact:	linux-iio@vger.kernel.org
11Description:
12		List all the available test tones:
13		- off
14		- midscale_short
15		- pos_fullscale
16		- neg_fullscale
17		- checkerboard
18		- prbs23
19		- prbs9
20		- one_zero_toggle
21		- user
22		- bit_toggle
23		- sync
24		- one_bit_high
25		- mixed_bit_frequency
26		- ramp
27
28		Note that depending on the actual device being used, some of the
29		above might not be available (and they won't be listed when
30		reading the file).
31
32What:		/sys/kernel/debug/iio/iio:deviceX/in_voltageY_test_mode
33KernelVersion:	6.11
34Contact:	linux-iio@vger.kernel.org
35Description:
36		Writing to this file will initiate one of available test tone on
37		channel Y. Reading it, shows which test is running. In cases
38		where an IIO backend is available and supports the test tone,
39		additional information about the data correctness is given.